2007 Alfa Romeo GT

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material to flexy (1.1.11 (c))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

various points of corrosion underside, but not excessive

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material to flexy (1.1.11 (c))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

various points of corrosion underside, but not excessive

Nearside Rear Brake pipe corroded, covered in grease or other material to flexy (1.1.11 (c))

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill , chassis (5.3.6 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material to flexy (1.1.11 (c))

Nearside Rear Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Rear Exhaust has a minor leak of exhaust gases join between centre pipe and back box (6.1.2 (a))

Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))

Horn not working (7.7 (a) (ii))

Rear Exhaust has a minor leak of exhaust gases join between centre pipe and back box (6.1.2 (a))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Oil leak, but not excessive Gearbox End Casing (8.4.1 (a) (i))

Nearside Front Upper Suspension arm pin or bush excessively worn Upper Wishbone Rear Bush (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge Inner Edge (5.2.3 (e))

Offside Front Tyre has a cut but not deep enough to reach the ply or cords Inner Sidewall. Inner Edge Bald (5.2.3 (d) (i))

Offside Rear Tyre has a cut but not deep enough to reach the ply or cords Inner Sidewall Cut/Damaged (5.2.3 (d) (i))

Oil leak, but not excessive Gearbox End Casing (8.4.1 (a) (i))

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Central Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Rear Nail in tyre

inner rack joints

n/s/r tyre has a nail in the inner wall

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a) DANGEROUS

n/s/r tyre has a nail in the inner wall

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)