1979 Toyota Hiace

Front Service brake requirements only just met. It would appear that the braking system requires adjustment or repair x 2 (1.2.1 (c))

Front Shock absorbers has a slightly worn bush x 2 (5.3.2 (c))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Rear leaf spring bushs worn

previous welded body repairs covered in underseal or fibre glass

Nearside Front Brake pipe excessively corroded at wheel cylinder (1.1.11 (c))

Nearside Front Brake pipe excessively corroded to flexi pipe (1.1.11 (c))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch/end of sill (6.1.1 (c) (i))

Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front leaf spring mount upper holed (5.3.6 (a) (i))

Offside Front Brake pipe excessively corroded at wheel cylinder (1.1.11 (c))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner/outer sill (6.1.1 (c) (i))

Offside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front leaf spring mount upper holed (5.3.6 (a) (i))

Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member holed,nsr inner corner and osr inner corner (6.1.1 (c) (i))

Rear Spare wheel carrier insecure (6.1.5 (a))

Front Brakes imbalanced across an axle by more than 50% nsf binding, osf weak (1.2.1 (b) (ii)) DANGEROUS

Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security floor/front cross member (6.2.2 (d) (i))

Nearside Front Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Rear Spare wheel carrier corroded

Steering box has seepage (2.1.1 (e) (i))

leaf spring 4 x bushes worn

previous welded body repairs covered in underseal or fibre glass

Body has slight corrosion n.s.r.inner sill (6.1.B.2)

Steering box has a slight oil leak (2.2.D.2e)

both front shocker bushes worn

Front Body has slight corrosion (6.1.B.2)

Nearside Front Lower Shock absorber has a slightly worn bush (2.7.4)

Offside Front Body has slight corrosion (6.1.B.2)

Offside Front Body has slight corrosion (6.1.B.2)

Offside Front Lower Shock absorber has a slightly worn bush (2.7.4)

Rear Body has slight corrosion (6.1.B.2)

Fuel pipe/s corroded

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Rear Registration plate lamp insecure (1.1.C.1c)

Rear Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Front Shock absorber has a slightly worn bush (2.7.4)

Nearside Body has slight corrosion (6.1.B.2)

steering box leak ing slightly

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Front Shock absorber has a slightly worn bush (2.7.4)