2002 Mazda MX-5

Front Brake hose has slight corrosion to ferrule both front brake hose ferules (1.1.12 (f) (i))

Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced Inner sill (6.1.1 (c) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Inner sill (6.1.1 (c) (i))

Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced Inner sill (6.1.1 (c) (i))

Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced Inner sill (6.1.1 (c) (i))

Rear Brake hose has slight corrosion to ferrule both rear brake hose ferules (1.1.12 (f) (i))

Rear Coil spring corroded both rear coil springs (5.3.1 (b) (i))

Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement both rear lower control arm inner bushes perished (5.3.4 (a) (i))

Rear Upper Gearbox mounting defective Rear differential bushes perished and slight play. ()

Rear Inner Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sills (6.2.2 (d) (i))

vehicle has surface rust front to back

Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor (6.2.2 (d) (i))

Rear Inner Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sills (6.2.2 (d) (i))

vehicle has surface rust front to back

Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security chassis (6.2.2 (d) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Rear Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Nearside Rear Mechanical brake component has restricted free movement (3.5.1k)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Tyre worn close to the legal limit both (4.1.E.1)

Rear brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Rear brake disc worn, pitted or scored, but not seriously weakened (both) (3.5.1i)

Offside Front front brake application uneven (3.7.B.2)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Rear brake disc worn, pitted or scored, but not seriously weakened (both) (3.5.1i)

Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Headlamp aim too high front both (1.8)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

advise offside rear brake bind

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front position lamp(s) not working (1.1.A.3b)

Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Headlamp aim too low (1.8)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Inner Front Brake pad(s) wearing thin (3.5.1g)

Nearside Outer Front Brake pad(s) wearing thin (3.5.1g)

Offside Inner Front Brake pad(s) wearing thin (3.5.1g)

Offside Outer Front Brake pad(s) wearing thin (3.5.1g)