2002 Honda ST1300

Motorcycle structure slightly damaged frame has been damaged and repaired . repairs look to be of a good standard ,partially covered by fairings (6.1.1a)

VIN plate and VIN number have been removed and re stamped

advise screen

Nearside Front Direction indicator missing (1.5.1a)

advise screen

Offside Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Brake disc(s) has excessive run out (3.2.A1m)

Horn is not continous or uniform (1.7.3c)

Rear Brake disc(s) has excessive run out (3.2.A1m)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Highbeam telltale lamp on all the time

O/s headlamp bulb not working

Offside Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Front Front wheel bearings have slight free play (2.3.5b)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Brake disc(s) slightly worn (3.2.A1l)

Front Steering movement slightly 'notchy' (2.2.1b)

Nearside Rear Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Nearside Front Front shock absorber seal failed and leaking oil (2.3.3)

Front Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Front Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Front Steering movement slightly 'notchy' (2.2.1b)

Nearside Rear Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

n/s mirror cracked

rear braked binding slightly

Rear Plate brake test indicates a binding brake (3.3.B1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Offside Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))