MOT Status
ExpiredMileage
113,434 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pedal wearing smooth (1.1.2 (c))
Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Engine oil leak, not excessive.
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement And O/S/F also. (5.3.4 (a) (i))
Nearside Front Brake hose has slight corrosion to ferrule And O/S/F and BOTH rears,inc corrosion to attached pipework at these ferules, getting bad now. (1.1.12 (f) (i))
Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive And O/S/F upper strut top mounting points, in inner wings. (5.3.6 (a) (i))
Nearside Rear Coil spring corroded And O/S/F also, and BOTH fronts, to blistered protective paint coatings. (5.3.1 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive And O/S/R inner also. (5.3.6 (a) (i))
Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge On 1.8mm approx and unevenly on outer edge. (5.2.3 (e))
Offside Front Seat belt stalk black surround missing, risk of accidental release.
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Rear Exhaust system insecure At securing clamp insecure/detached. (6.1.2 (a))
Brake pedal wearing smooth (1.1.2 (c))
Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Engine oil leak, not excessive.
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement And O/S/F also. (5.3.4 (a) (i))
Nearside Front Brake hose has slight corrosion to ferrule And O/S/F and BOTH rears,inc corrosion to attached pipework at these ferules, getting bad now. (1.1.12 (f) (i))
Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive And O/S/F upper strut top mounting points, in inner wings. (5.3.6 (a) (i))
Nearside Rear Coil spring corroded And O/S/F also, and BOTH fronts, to blistered protective paint coatings. (5.3.1 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive And O/S/R inner also. (5.3.6 (a) (i))
Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge On 1.8mm approx and unevenly on outer edge. (5.2.3 (e))
Offside Front Seat belt stalk black surround missing, risk of accidental release.
Spare wheel insecure, carrier not locked secure.
Fuel system component leaking Fuel Filter, under bonnet (6.1.3 (b) (i))
Nearside Electrical wiring insecure and in contact with sharp edges Wiring direct from battery insecure/incorrectly routed through bulkhead, on sharp metal edge, of grommet hole, risk of shorting (4.11 (a) (ii))
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt Wishbone. (5.3.4 (b) (ii))
Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Rear Exhaust silencer insecure Securing clamp insecure/leaking and system misaligned (8.1.1 (b) (i))
Brake pedal anti slip pad worn
Central Stop lamp(s) non-obligatory stop lamp not working Eye level. (4.3.1 (a) (ii))
Engine oil leak, not excessive.
Front Coil spring corroded And Rear, x4, corroded beneath blistered protective paint coatings. (5.3.1 (b) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement And O/S/F also. (5.3.4 (a) (i))
Nearside Front Brake hose has slight corrosion to ferrule And O/S/F and BOTH rears, inc attached steel pipework, getting quite bad. (1.1.12 (f) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement And O/S/F lower, wishbone inners. (5.3.4 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive And O/S/R inner also. (5.3.6 (a) (i))
Nearside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))
Nearside Rear Tyre worn close to legal limit/worn on edge On approx 1.8mm and badly/unevenly worn, on outer edge. (5.2.3 (e))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated Wishbone. (5.3.4 (b) (i))
Offside Front Seat belt stalk black surround missing, risk of accidental release.
Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive And N/S/F upper strut top mounting points, in inner wings. (5.3.6 (a) (i))
Brake pedal anti slip pad worn.
Front Brake hose has slight corrosion to ferrule And rear, x4, to their exposed steel surfaces, inc attached metal pipework also. (1.1.12 (f) (i))
Front Coil spring corroded And rear, x4, corroded beneath their blistered protective paint coatings. (5.3.1 (b) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement And O/S/F also. (5.3.4 (a) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated And O/S/F lower also, split/perished cracked. (5.3.4 (b) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement And O/S/F lower wishbones, inners. (5.3.4 (a) (i))
Nearside Rear Lower Shock absorbers has a slightly worn bush And O/S/R lower also, perished. (5.3.2 (c))
Offside Front Seat belt stalk black surround missing, risk of accidental release.
Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive And N/S/F upper strut top mounting points, in inner wing area. (5.3.6 (a) (i))
Exhaust system insecure Backbox not clamped (6.1.2 (a))
Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced N/S/R and O/S/R rear crossmembers (6.1.1 (c) (i))
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner and outer sill (6.1.1 (c) (i))
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner and outer sill (6.1.1 (c) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Service brake efficiency below requirements (1.2.2 (a) (i))
Speedometer clearly inoperative (7.8 (b) (ii))
Suspension arm pin or bush excessively worn Both rear trailing arms (5.3.4 (a) (i))
Anti-roll bar pin or bush worn but not resulting in excessive movement Both front (5.3.4 (a) (i))
Shock absorbers has a slightly worn bush Both rear (5.3.2 (c))
Suspension arm pin or bush worn but not resulting in excessive movement Both front lower arm bushes (5.3.4 (a) (i))
Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Inner Brake disc significantly and obviously worn (1.1.14 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Brake pedal wearing smooth (1.1.2 (c))
Front Side repeater slightly discoloured Both (4.4.3 (a))
Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake hose has slight corrosion to ferrule Both (1.1.12 (f) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement Both (5.3.4 (a) (i))
Nearside Front Brake hose excessively deteriorated (1.1.12 (b) (ii))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Rear Position lamp showing white light to the rear (4.2.3 (a) (ii))
Nearside Rear Rear reflector defective or damaged by more than 50% of the reflecting surface (4.8.1 (a) (ii))
Offside Front Brake hose excessively deteriorated (1.1.12 (b) (ii))
Brake pedal wearing smooth (1.1.2 (c))
Front Side repeater slightly discoloured Both (4.4.3 (a))
Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake hose has slight corrosion to ferrule Both (1.1.12 (f) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement Both (5.3.4 (a) (i))
Nearside Rear Vehicle structure has slight damage sill (6.1.A.1)
Oil leak ()
Vehicle structure has slight corrosion (6.1.A.1)
Central Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Outer Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Rear Rear position lamp(s) excessively damaged so that it is not visible from a reasonable distance (1.1.A.3d)
Parking brake lever defective so that it cannot be satisfactorily operated (3.1.3c)
Nearside Rear Vehicle structure has slight damage sill (6.1.A.1)
Oil leak ()
Vehicle structure has slight corrosion (6.1.A.1)
Front Exhaust has a major leak of exhaust gases emissions not tested (7.1.2)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Registration plate lamp not working (1.1.C.1d)
Nearside Front Track rod end ball joint has slight play (2.2.B.1f)
Offside Front Seat belt stitching slightly frayed (5.2.2b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
How Reliable is the Fiat Scudo?
Based on 592,996 MOT tests across 40,591 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
FP03 KUF is a 2003 Fiat Scudo in Red with a 1,997cc diesel engine. This vehicle has been through 25 MOT tests with a personal pass rate of 68%.
Across all 2003 Fiat Scudo models, the average MOT pass rate is 68.5% with a typical mileage of 88,307 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Fiat Scudo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 25,288 recorded failures. If you're considering buying FP03 KUF, it's worth having these areas checked by a mechanic before committing.
The Fiat Scudo typically stays on UK roads for around 29 years. At 23 years old, this Fiat Scudo is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of FP03 KUF?
You can check the full history of FP03 KUF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was FP03 KUF registered?
FP03 KUF is a 2003 Fiat Scudo, first registered on 29 May 2003.
Is FP03 KUF safe to buy?
The MOT history for FP03 KUF shows 25 tests with a 68% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does FP03 KUF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on FP03 KUF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.