2004 Toyota MR2

Front Brake disc worn, pitted or scored, but not seriously weakened Both sides (1.1.14 (a) (ii))

Front Coil spring corroded Both sides (5.3.1 (b) (i))

Front Exhaust has a minor leak of exhaust gases Manifold area (6.1.2 (a))

Front Headlamp has a product on the lens but not seriously reducing light output Both sides (4.1.4 (b))

Front Tyre slightly damaged/cracking or perishing Both sides (5.2.3 (d) (ii))

Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Both sides (6.2.2 (d) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Both sides (6.2.2 (d) (i))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

racing harness & bucket seats fitted and pretensioners removed but all anchorage points fitted correctly

small chip in windscreen

Brake lever has insufficient reserve travel handbrake (1.1.2 (a))

Horn not working (7.7 (a))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

racing harness & bucket seats fitted and pretensioners removed but all anchorage points fitted correctly

small chip in windscreen

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Power steering fluid level below minimum (2.1.5 (b) (i))

Rear both backplates secure

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

both front headlamps slightly deteriorated

carpets removed and roll cage installed but strong and secure

corrosion to chassis around abs unit

racing harness and bucket seats installed and pretensioners removed but all anchorage points solid and secure

Driver's airbag missing (7.1.5 (a))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Power steering fluid level below minimum (2.1.5 (b) (i))

Rear both backplates secure

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

both front headlamps slightly deteriorated

carpets removed and roll cage installed but strong and secure

corrosion to chassis around abs unit

racing harness and bucket seats installed and pretensioners removed but all anchorage points solid and secure

Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Front Passenger seat(s) missing at time of test ()

Nearside Front Standard fitment seat belt missing ()

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Parking Brake Has Little Reserve travel

Nearside Front Headlamp reflector slightly defective (4.1.1 (b) (i))

Nearside Front standard fit passenger seat belt absent

Nearside Front standard fit passenger seat not presented

Offside Front Headlamp reflector slightly defective (4.1.1 (b) (i))

Passenger seat(s) missing at time of test ()

Body has slight corrosion (6.1.B.2)

Nearside Front Passenger seat(s) missing at time of test ()

Nearside Front Standard fitment seat belt missing ()

Parking brake lever has little reserve travel (3.1.6b)

Parking brake lever has little reserve travel (3.1.6b)

engine management light on dash

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake lever has no reserve travel (3.1.6b)

Steering system excessively tight (2.2.D.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Registration plate lamp not working (1.1.C.1d)

Rear Sub-frame corroded and seriously weakened (2.4.G.1)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Front Tyre worn close to the legal limit (4.1.E.1)

Rear rear brake binding (3.7.B.1)

Parking brake: efficiency below requirements (3.7.B.7)

Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Mechanical brake component has restricted free movement (3.5.1k)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

O/S/R TYRE ON 2MM