MOT Status
ExpiredMileage
106,695 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Inner Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Inner Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Headlamp aim too high (1.8)
Nearside Inner Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Inner Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Front coil spring broken (2.4.C.1a)
Nearside Headlamp aim too low (1.8)
Nearside Rear wheel bearing rough when rotated (2.6.1)
Nearside Stop lamp not working (1.2.1b)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Stop lamp not working (1.2.1b)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear position lamp(s) not working (1.1.A.3b)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
n/s/r tyre uneven tread
clutch pipe leaking
uneven wear on n/sr
Nearside Registration plate lamp not working (1.1.5c)
Offside Registration plate lamp not working (1.1.5c)
clutch pipe leaking
uneven wear on n/sr
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
FP04 XLL is a 2004 Ford Ka in Silver with a 1,299cc petrol engine. This vehicle has been through 14 MOT tests with a personal pass rate of 64.3%.
Across all 2004 Ford Ka models, the average MOT pass rate is 67.3% with a typical mileage of 45,689 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying FP04 XLL, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 22 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of FP04 XLL?
You can check the full history of FP04 XLL by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was FP04 XLL registered?
FP04 XLL is a 2004 Ford Ka, first registered on 30 April 2004.
Is FP04 XLL safe to buy?
The MOT history for FP04 XLL shows 14 tests with a 64.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does FP04 XLL have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on FP04 XLL. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.