2006 Vauxhall Vivaro

Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))

Nearside Front strut top mount notchy

Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Emissions unable to be completed exhaust leak (8.2.2.2 (e))

Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))

Nearside Front Anti-lock braking system wiring damaged but not excessively rubbing drive shaft (1.6 (d))

Nearside Front strut top mount notchy

Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material by tank (1.1.11 (c))

Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Nearside Rear Brake pipe corroded, covered in grease or other material by tank (1.1.11 (c))

Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Jacking point (5.3.6 (a) (i))

Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Rear Rear fog lamp not working (4.5.1 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Offside Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Rear brake caliper has restricted free movement handbrake lever (3.5.1k)

Parking brake: efficiency below requirements (3.7.B.7)

Parking brake lever has little reserve travel (3.1.6b)

Nearside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Parking brake: efficiency below requirements (3.7.B.7)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

n/s mirror slightly cracked

Headlamp aim too high (1.8)

Offside Front Steering rack gaiter split (2.2.D.2d)

Offside Front wheel bearing has excessive play (2.5.A.3c)

Offside Stop lamp not working (1.2.1b)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

n/s mirror slightly cracked

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Headlamp aim too low (1.8)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp aim too low (1.8)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Oil leak

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Macpherson strut has excessive movement in the upper support bearing assembly (2.5.B.1b)

Parking brake: efficiency below requirements (3.7.B.7)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Oil leak

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too high (1.8)

Offside front suspension top mount worn

Registration plate lamp not working (1.1.C.1d)

Offside front suspension top mount worn

Nearside Steering arm has relative movement at its fixings (2.2.B.1h)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Steering arm has relative movement at its fixings (2.2.B.1h)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Windscreen washer provides insufficient washer liquid (8.2.3)