2006 Fiat Scudo

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))

sills starting to rust

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Suspension arm insecurely attached bolt loose (5.3.3 (a) (i))

Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

sills starting to rust

front screen cracked

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill several places (5.3.6 (a) (i))

Offside Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill in several places (5.3.6 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

front screen cracked

Nearside Front Radius arm has excessive play in a ball joint (2.4.G.2)

Nearside Rear Axle swivel joint insecure in a suspension arm axle to body bush (2.5.A.3b)

Offside Rear Axle swivel joint insecure in a suspension arm axle to body bush (2.5.A.3b)

Battery insecure (1.9.1)

Brake load sensing valve seized (3.6.E.3)

Offside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Offside Registration plate lamp not working (1.1.C.1d)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

front discs worn

sills starting to rust

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Radius arm has excessive play in a ball joint (2.4.G.2)

Registration plate lamp not working (1.1.C.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

front brake application uneven (3.7.B.2)

front discs worn

sills starting to rust

Front coil spring corroded (2.4.C.1b)

Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Front coil spring corroded (2.4.C.1b)

tracking

Nearside Front Anti-roll bar attachment bracket/mounting fractured (2.4.G.1)

Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front coil spring worn (2.4.C.1b)

Offside Front coil spring worn (2.4.C.1b)

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front coil spring worn (2.4.C.1b)

Offside Front coil spring worn (2.4.C.1b)

Brake load sensing valve stiff (3.6.E.3)

Nearside Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Offside Front All position lamps not working (1.1.A.3b)

Nearside Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Windscreen damaged outside swept area

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Side repeater not working (1.4.A.2c)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Windscreen damaged outside swept area

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

windscreen has a crack outside of swept area