2008 Kia Rio

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Front bush (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Brake performance not tested (3.7.A.1)

Front position lamp(s) not working (1.1.A.3b)

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g) DANGEROUS

Nearside Front Tyre slightly worn outer edge

Nearside Wiper blade spliitting

Nearside Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Stop lamp not working (1.2.1b)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Front Tyre slightly worn outer edge

Nearside Wiper blade spliitting

Offside Registration plate lamp not working (1.1.C.1d)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

front brake discs worn

rear brake discs worn

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

front brake discs worn

rear brake discs worn

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Rear registration plate insecure (6.3.1b)

Inner Headlamp aim too high (1.8)

Nearside Headlamp aim too high (1.8)

O/S/F wiper blade has small split.

Rear tyres starting to deteriorate