2008 Toyota Aygo

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

genral under body corrsion

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Rear Subframe mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Subframe mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Rear Subframe mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Subframe mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

genral under body corrsion

Front Inner Tyre worn close to legal limit/worn on edge nearside and offside (5.2.3 (e))

Front Suspension arm pin or bush worn but not resulting in excessive movement nearside and offside rear bushes (5.3.4 (a) (i))

underbody corrosion

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Front Inner Tyre worn close to legal limit/worn on edge nearside and offside (5.2.3 (e))

Front Suspension arm pin or bush worn but not resulting in excessive movement nearside and offside rear bushes (5.3.4 (a) (i))

underbody corrosion

Clutch slipping

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear outer sills (5.3.6 (a) (i))

Clutch slipping

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Items removed from driver's view prior to test ()

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge Inner edge (5.2.3 (e))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Front Items removed from driver's view prior to test ()

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge Inner edge (5.2.3 (e))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Brake pipe excessively corroded front to rear (1.1.11 (c))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Brake pipe excessively corroded front to rear (1.1.11 (c))

Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Service brake grabbing severely (1.2.1 (c))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Offside Rear Service brake excessively binding (1.2.1 (f))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Front Outer Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Position lamp not working (4.2.1 (a))

Offside Headlamp aim too low (4.1.2 (a))

Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii))

Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii))

o/s sill damage

corrosion and wear on front discs b/l

front brake pad wear

n/s/f tyre wear on edges

corrosion on front discs

n/s/f tyre wear outer edge

Nearside Stop lamp not working (1.2.1b)

Offside Rear fog lamp not working (1.3.2b)

Offside Side repeater not working (1.4.A.2c)

corrosion on front discs

n/s/f tyre wear outer edge

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Headlamp aim too high (1.8)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Brake pad(s) wearing thin (3.5.1g)