2010 Ford S-max

Play in steering rack inner joint(s) ()

Rear Coil spring corroded Both (5.3.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Play in steering rack inner joint(s) ()

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Coil spring corroded Both rear. (5.3.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Seat belt buckle not functioning as intended (7.1.2 (d))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Play in steering rack inner joint(s) ()

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Coil spring corroded Both rear. (5.3.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Rear Nail in tyre ()

Brake lever has insufficient reserve travel (1.1.2 (a))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Nearside Rear Nail in tyre ()

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Rear Exhaust has a minor leak of exhaust gases Hole in rear box (6.1.2 (a))

Front Tyre worn close to legal limit/worn on edge both wearing on inside edges (5.2.3 (e))

Front Tyre worn close to legal limit/worn on edge both wearing on inside edges (5.2.3 (e))

Nearside Side repeater not working (4.4.1 (a) (ii))

Nearside Rear Suspension arm pin or bush excessively worn trailing arm front bush (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush excessively worn trailing arm front bush (5.3.4 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))

both rear tyres cracking in treads

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Headlamp aim too high Both (1.8)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Engine covers fitted obscuring some components in the engine bay