MOT Status
ValidMileage
118,290 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Suspension arm corroded but not seriously weakened both rear (5.3.3 (b) (i))
Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Suspension arm corroded but not seriously weakened both rear (5.3.3 (b) (i))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement on the radius arm (5.3.4 (a) (i))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement on the radius arm (5.3.4 (a) (i))
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement on the radius arm (5.3.4 (a) (i))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement on the radius arm (5.3.4 (a) (i))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Nearside Rear Inner Position lamp slightly affected by the operation of another lamp Flickering (4.2.3 (c))
Nearside Front Service brake excessively fluctuating (1.2.1 (e))
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords Several (5.2.3 (d) (i))
Offside Front Service brake excessively fluctuating (1.2.1 (e))
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords Several. (215/60R16 99V (5.2.3 (d) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened Heavily corroded (1.1.14 (a) (ii))
Nearside Rear Inner Position lamp slightly affected by the operation of another lamp Flickering (4.2.3 (c))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened on inner face (1.1.14 (a) (ii))
Brake performance not tested (1.2.1 (g))
Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened on inner face (1.1.14 (a) (ii))
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
offside front tyre tread low on the inside edge
Engine cover & under trays fitted
Front brake discs worn,lipped & inner face of 1 disc is in poor condition
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords 215/60-16 95v (4.1.D.1a)
Engine cover & under trays fitted
Front brake discs worn,lipped & inner face of 1 disc is in poor condition
O/S/R Tyre severely perished/splitting
Offside Rear Tyre worn close to the legal limit Inner edge very low/Bald (4.1.E.1)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
both front and offside rear tyre treads low on the inside edges
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords Outer Sidewall Damaged (4.1.D.1a)
Engine covers fitted obscuring some components in the engine bay
Rear Brake pad(s) wearing thin (3.5.1g)
Under-trays fitted obscuring some underside components
How Reliable is the Ford S-max?
Based on 1,368,227 MOT tests across 101,843 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
FP12 KSE is a 2012 Ford S-max in Black with a 1,560cc diesel engine. This vehicle has been through 19 MOT tests with a personal pass rate of 63.2%.
Across all 2012 Ford S-max models, the average MOT pass rate is 75.9% with a typical mileage of 75,817 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford S-max fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 26,089 recorded failures. If you're considering buying FP12 KSE, it's worth having these areas checked by a mechanic before committing.
The Ford S-max typically stays on UK roads for around 20 years. At 14 years old, this Ford S-max is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of FP12 KSE?
You can check the full history of FP12 KSE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was FP12 KSE registered?
FP12 KSE is a 2012 Ford S-max, first registered on 23 May 2012.
Is FP12 KSE safe to buy?
The MOT history for FP12 KSE shows 19 tests with a 63.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does FP12 KSE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on FP12 KSE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.