2004 Mercedes-benz Vito

Horn not working properly (7.7 (a) (i))

Central Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Front Headlamp light intensity severely reduced (4.1.4 (a))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced center (6.1.1 (c) (i))

Offside Front Headlamp light intensity severely reduced (4.1.4 (a))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))

Offside Rear Outer Body component corroded and likely to cause injury wheel arch (6.2.1 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Electronic braking system warning device inoperative (1.7 (a))

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced out rigger (7.1.1 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive out rigger / jacking point (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Central Stop lamp(s) lens defective which has no effect on emitted light (4.3.1 (b) (i))

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive jacking point by front subframe rear mounting. (5.3.6 (a) (i))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security central out rigger (6.2.2 (d) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive jacking point by front subframe rear mounting. (5.3.6 (a) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security central out rigger (6.2.2 (d) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced crossmember (6.1.1 (c) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Central Stop lamp(s) lens defective which has no effect on emitted light (4.3.1 (b) (i))

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive jacking point by front subframe rear mounting. (5.3.6 (a) (i))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security central out rigger (6.2.2 (d) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive jacking point by front subframe rear mounting. (5.3.6 (a) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security central out rigger (6.2.2 (d) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced crossmember (6.1.1 (c) (i))

Nearside Body has slight corrosion central out rigger (6.1.B.2)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Body has slight corrosion central out rigger (6.1.B.2)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

outer sills slightly corroded at rear.

Front Exhaust system not adequately supported (7.1.1)

Nearside Rear Brake pipe excessively corroded to brake hose (3.6.B.2c)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Body has slight corrosion central out rigger (6.1.B.2)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Body has slight corrosion central out rigger (6.1.B.2)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

outer sills slightly corroded at rear.

Nearside Body has slight corrosion centre outrigger (6.1.B.2)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive by jacking point (2.4.A.3)

Offside Body has slight corrosion centre outrigger (6.1.B.2)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive by jacking point (2.4.A.3)

nearside and offside rear outer sills slightly corroded

Nearside Rear Suspension component mounting prescribed area is excessively corroded by suspension arm mounting (2.4.A.3)

Offside Front Brake pipe excessively corroded to brake hose (3.6.B.2c)

Offside Rear Brake pipe excessively corroded to brake hose (3.6.B.2c)

Offside Rear Suspension component mounting prescribed area is excessively corroded by suspension arm mounting (2.4.A.3)

Nearside Body has slight corrosion centre outrigger (6.1.B.2)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive by jacking point (2.4.A.3)

Offside Body has slight corrosion centre outrigger (6.1.B.2)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive by jacking point (2.4.A.3)

nearside and offside rear outer sills slightly corroded

Nearside Front tyre wearing unevely

Offside Front tyre wearing unevenly

Rear fog lamp not working (1.3.2b)

Nearside Front tyre wearing unevely

Offside Front tyre wearing unevenly

Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Electronic stability system warning lamp indicates a fault (3.4.1c)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Headlamp aim too low (1.8)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Stop lamp not working (1.2.1b)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Direction indicator slightly discoloured (1.4.A.2f)

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Nearside Rear coil spring incomplete (2.4.C.1a)

Offside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Nearside Front Direction indicator slightly discoloured (1.4.A.2f)

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)