MOT Status
ExpiredMileage
92,838 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
General underneath corrosion
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Brake hose has slight corrosion to ferrule All (1.1.12 (f) (i))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Tyre wearing on edges
Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Chassis (6.1.1 (c) (i))
Nearside Rear Suspension arm corroded but not seriously weakened Lower arm (5.3.3 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm (5.3.4 (a) (i))
Offside Front Tyre wearing on edges
Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Chassis (6.1.1 (c) (i))
Offside Rear Suspension arm corroded but not seriously weakened Lower arm (5.3.3 (b) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm (5.3.4 (a) (i))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Side repeater not working (4.4.1 (a) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Brake hose has slight corrosion to ferrule All (1.1.12 (f) (i))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Tyre wearing on edges
Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Chassis (6.1.1 (c) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Suspension arm corroded but not seriously weakened Lower arm (5.3.3 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm (5.3.4 (a) (i))
Offside Front Tyre wearing on edges
Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Chassis (6.1.1 (c) (i))
Offside Rear Suspension arm corroded but not seriously weakened Lower arm (5.3.3 (b) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm (5.3.4 (a) (i))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Headlamp has a product on the lens but not seriously reducing light output Both (4.1.4 (b))
Rear Suspension arm corroded but not seriously weakened Both (5.3.3 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Nail in tyre ()
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Nail in tyre ()
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Side repeater not working (4.4.1 (a) (ii))
Offside Front Lower Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Front Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)
Offside Rear Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Parking brake: efficiency below requirements (3.7.B.7)
Headlamp has a product on the lens but not seriously reducing light output both (1.7.5a)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Nail in tyre ()
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
registration plate lamps dim
rear brake application uneven (3.7.B.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Registration plate lamp not working (1.1.C.1d)
Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Stop lamp not working (1.2.1b)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Windscreen washer provides insufficient washer liquid (8.2.3)
How Reliable is the Ford Focus C-max?
Based on 1,326,487 MOT tests across 79,932 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
FP56 XND is a 2007 Ford Focus C-max in Orange with a 1,999cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 68.2%.
Across all 2007 Ford Focus C-max models, the average MOT pass rate is 73.2% with a typical mileage of 69,994 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Focus C-max fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 67,238 recorded failures. If you're considering buying FP56 XND, it's worth having these areas checked by a mechanic before committing.
The Ford Focus C-max typically stays on UK roads for around 23 years. At 19 years old, this Ford Focus C-max is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of FP56 XND?
You can check the full history of FP56 XND by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was FP56 XND registered?
FP56 XND is a 2007 Ford Focus C-max, first registered on 23 January 2007.
Is FP56 XND safe to buy?
The MOT history for FP56 XND shows 22 tests with a 68.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does FP56 XND have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on FP56 XND. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.