2006 Honda Accord

Nearside Front Upper Suspension arm ball joint excessively worn Upper wishbone ball joint (5.3.4 (a) (i))

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Front Brake pad(s) wearing thin both side (1.1.13 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Parking (secondary brake) grabbing slightly (1.3.1 (c))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear SEAT BELT NOT TEST CHILD SEAT

Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Rear Parking (secondary brake) on a single line braking system has no recorded effort at a wheel (1.3.1 (a) (ii)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake lining(s) wearing thin BOTH SIDE (1.1.13 (a) (ii))

Rear SEAT BELT NOT TEST CHILD SEAT

surface corrosion rear seals

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement D Bush. (5.3.4 (a) (i))

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement D Bush. (5.3.4 (a) (i))

Offside Rear Outer Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Sill. (6.2.2 (d) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Floor pan. (6.1.1 (c) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Floor pan. (6.1.1 (c) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

nearside front tyre wearing on edges 205/55/16

nearside rear tyre wearing on edges 205/55/16

offside front tyre wearing on edges 205/55/16

offside rear tyre wearing on edges 205/55/16

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)