2010 Nissan Micra

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp insecure (4.1.1 (c))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Road wheel fixing missing (5.2.1 (a) (i))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))

Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front head light unit top mounting broken

Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Exhaust emissions exceed default limit of 1.5m-1 (8.2.2.2 (b))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Windscreen washer not working (3.5 (a))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Front Service brake excessively fluctuating (1.2.1 (e))

Offside Windscreen washer not working (3.5 (a))

Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front head light unit top mounting broken

Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Engine covers and undertrays fitted.

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Engine covers and undertrays fitted.

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

cut in n/s/f tyre wall

Front Brake pad(s) wearing thin (3.5.1g)

Oil leak

Registration plate lamp not working (1.1.C.1d)