2010 Vauxhall Vivaro

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Front Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front General underside corrosion

Front Registration plate deteriorated but not likely to be misread damaged (0.1 (b))

Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Front General underside corrosion

Front Registration plate deteriorated but not likely to be misread damaged (0.1 (b))

Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Brake pad(s) wearing thin rear both sides (1.1.13 (a) (ii))

Brake pad(s) wearing thin rear both sides (1.1.13 (a) (ii))

Nearside Front Headlamp aim too high (4.1.2 (a))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Headlamp aim too high (4.1.2 (a))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

front to rear brake pipes corroded

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Nearside Brake pipe excessively corroded main {as marked} (3.6.B.2c)

Nearside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Brake pipe excessively corroded main{as marked} (3.6.B.2c)

Offside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Direction indicator incorrect colour (1.4.A.2f)

Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)