2012 Kia Ceed

Exhaust silencer slightly loose front mounting (8.1.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Rear Child Seat fitted not allowing full inspection of adult belt ()

o/s and n/s front suspension strut top mounts noisy on turns

o/s and n/s rear brake discs rusty

Nearside Front Headlamp aim too high (4.1.2 (a))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Exhaust silencer slightly loose front mounting (8.1.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Rear Child Seat fitted not allowing full inspection of adult belt ()

o/s and n/s front suspension strut top mounts noisy on turns

o/s and n/s rear brake discs rusty

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Headlamp aim too high (4.1.2 (a))

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

washer jets insecure

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Windscreen damaged but not adversely affecting driver's view stonechip on offside (3.2 (a) (i))

clutch biteing right at floor & hard to engauge gears

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Windscreen damaged but not adversely affecting driver's view stonechip on offside (3.2 (a) (i))

clutch biteing right at floor & hard to engauge gears

small sstone chip to zone a

Nearside Front Inner Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

small sstone chip to zone a

Items removed from driver's view prior to test ()

Offside Front Lower Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge 2.5mm (5.2.3 (e))

Nearside Inner Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Inner Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Nearside Stop lamp not working (1.2.1b)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Headlamp aim too low (1.8)

Nearside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)