2013 Vauxhall Vivaro

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement `d` bush (5.3.4 (a) (i))

Offside Front Outer Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Steering rack gaiter damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Rear Brake pipe corroded, covered in grease or other material section corroded (1.1.11 (c))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Sub-frame corroded but not seriously weakened beam axle (5.3.3 (b) (i))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Headlamp aim projected beam image is obviously incorrect bulb not located (4.1.2 (c))

Nearside Front Inner Anti-roll bar pin or bush excessively worn `d` bush (5.3.4 (a) (i))

Nearside Front Outer Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement `d` bush (5.3.4 (a) (i))

Offside Front Outer Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Steering rack gaiter damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Rear Brake pipe corroded, covered in grease or other material section corroded (1.1.11 (c))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Sub-frame corroded but not seriously weakened beam axle (5.3.3 (b) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Brake pedal rubber slightly worn.

Drivers side of windscreen slightly scored.

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Inner Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Inner Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Trailing arm rubber bush deteriorated resulting in excessive movement Front bush. (2.4.G.2)

Brake pedal rubber slightly worn.

Drivers side of windscreen slightly scored.

Drivers side washer jet partly blocked.

Front registration plate deteriorated but not likely to be misread (6.3.1d)

High level brake light inop.

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front Inner Brake pad(s) wearing thin (3.5.1g)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Passengers side washer partly blocked.

Nearside Front Front suspension has a loose unit in the upper support bearing assembly (2.5.B.3b)

Offside Front Front suspension has a loose unit in the upper support bearing assembly (2.5.B.3b)