2007 Honda Cbr 1000 RR-7

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Headlamp aim too high (4.1.2 (a))

Headlamp aim too high (4.1.2 (a))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

BRAKE SHOULD BE BETTER

Drive chain slightly loose (6.1.7 (c) (i))

Front Outer Brake pad(s) close to minimum limit ON LIMIT (1.1.13 (a))

Suspension pin, bush or joint worn but not resulting in excessive movement REAR LOWER (5.3.4 (a) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake binding but not excessively (1.2.1 (f))

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake binding but not excessively (1.2.1 (f))

Headlamp aim too high (4.1.2 (a))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Drive chain excessively loose (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Exhaust noisy can loud (7.1.2)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Front Tyre tread depth is below minimum requirements of 1.0mm 0.93mm thread depth (4.1.3(ii))

Rear Footrest missing presented with passenger pillion seat and no footrests (6.2.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm 0.73mm thread depth (4.1.3(ii))

Exhaust noisy can loud (7.1.2)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Exhaust noisy (7.1.2)

Offside Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Exhaust noisy (7.1.2)

Front Brake lever has inadequate reserve travel Adjusted at Test Station. (3.1.3b)

Offside Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear Stop lamp does not illuminate immediately a brake applies Adjusted. (1.3.1a)

Headlamp aim too low (1.6)

Front Tyre worn close to the legal limit (4.1.3(ii))