MOT Status
ExpiredMileage
110,225 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Hazard warning switch inoperative (4.4.2 (a) (ii))
Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c))
Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))
Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Offside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Brake pipe inadequately clipped or supported (1.1.11 (d) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive inner sill (7.1.1 (a) (i))
Nearside outer sill corroded
Offside Seat belt anchorage prescribed area is corroded but not considered excessive inner sill (7.1.1 (a) (i))
nearside outer sill corroded
Offside Front Position lamp not working (4.2.1 (a) (ii))
Brake pad(s) wearing thin fronts (1.1.13 (a) (ii))
Brake pipe corroded, covered in grease or other material both sides rear of mains (1.1.11 (c))
Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Brake pipe corroded, covered in grease or other material o/s and n/s front to rear (1.1.11 (c))
Front Brake disc worn, pitted or scored, but not seriously weakened o/s and n/s (1.1.14 (a) (ii))
Brake pipe corroded, covered in grease or other material both main (1.1.11 (c))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
both rear tyre showing signs of cracking
Nearside Rear Child Seat fitted not allowing full inspection of adult belt
Nearside Headlamp aim too high (1.8)
Nearside Rear Child Seat fitted not allowing full inspection of adult belt
Windscreen wiper does not clear the windscreen effectively (8.2.2)
Brake pipe slightly corroded (3.6.B.2c)
How Reliable is the Peugeot 107?
Based on 2,229,410 MOT tests across 139,779 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
FR10 JVM is a 2010 Peugeot 107 in Yellow with a 998cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 82.4%.
Across all 2010 Peugeot 107 models, the average MOT pass rate is 78.3% with a typical mileage of 49,812 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Peugeot 107 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 42,280 recorded failures. If you're considering buying FR10 JVM, it's worth having these areas checked by a mechanic before committing.
The Peugeot 107 typically stays on UK roads for around 21 years. At 16 years old, this Peugeot 107 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of FR10 JVM?
You can check the full history of FR10 JVM by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was FR10 JVM registered?
FR10 JVM is a 2010 Peugeot 107, first registered on 27 August 2010.
Is FR10 JVM safe to buy?
The MOT history for FR10 JVM shows 17 tests with a 82.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does FR10 JVM have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on FR10 JVM. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.