1998 Datsun 240Z

Nearside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Integral body structure is repaired but structural rigidity is not significantly reduced Covered in underseal (6.1.1 (d) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Headlamp insecure (1.7.3)

Nearside Stop lamp not working (1.2.1b)

Offside Headlamp aim too high (1.8)

Offside Stop lamp not working (1.2.1b)

Windscreen washer provides insufficient washer liquid (8.2.3)

car under sealed

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Horn not working (1.6.2a)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Body has slight corrosion (6.1.B.2)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

poor beam pattern o/s and n/s

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Front Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Nearside Front Headlamp not working on main beam (1.7.5a)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Rear Direction indicator not working (1.4.A.2c)

Offside Front Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Offside Front Headlamp not working on main beam (1.7.5a)

Parking brake lever has no reserve travel (3.1.6b)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Horn not working (1.6.2a)

Nearside Front Anti-roll bar attachment bracket inappropriately repaired (2.4.A.2)

Parking brake lever has no reserve travel (3.1.6b)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too low (1.8)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

front brake application uneven (3.7.B.2)

Hazard warning tell tale not working correctly (1.4.B.1e)

Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Rear Stop lamp not working (1.2.1b)