2005 Toyota Aygo

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps BOTH (4.7.1 (b) (ii))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle and mounting (5.3.6 (a) (i))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn axle bushes both sides (5.1.2 (b) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at axle mounting and sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle and mounting (5.3.6 (a) (i))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn axle bushes both sides (5.1.2 (b) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Brake pipe corroded, covered in grease or other material front to rear both sides (1.1.11 (c))

Rear Sub-frame pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Brake pipe corroded, covered in grease or other material front to rear both sides (1.1.11 (c))

Rear Sub-frame pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Corrosion to the front suspensions component and the rear suspensions component underside of the vehicle, but not seriously weakened, both sides

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Rear Suspension component pin or bush slightly worn both sides (5.3.4 (a) (i))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Suspension component pin or bush slightly worn (5.3.4 (a) (i))

Nearside Rear Tyre slightly damaged (5.2.3 (d) (ii))

Offside Rear Suspension component pin or bush slightly worn (5.3.4 (a) (i))

Offside Rear Tyre slightly damaged (5.2.3 (d) (ii))

Brake lever has insufficient reserve travel (1.1.2 (a))

Central Exhaust system insecure centre bracket snapped (6.1.2 (a))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Suspension component pin or bush slightly worn (5.3.4 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Suspension component pin or bush slightly worn (5.3.4 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Position lamp not working (4.2.1 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Central Front Exhaust mounting defective (6.1.2 (a))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Central Front Exhaust mounting defective (6.1.2 (a))

Nearside Front Position lamp not working (4.2.1 (a))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Headlamps discoloured poor aim

Headlamps discoloured poor aim

Offside Side repeater incorrect colour (1.4.A.2f)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Items removed from driver's view prior to test

Items removed from driver's view prior to test

Nearside Headlamp aim too high (1.8)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp aim too high (1.8)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too low (1.8)