2005 Mercedes-benz Vito

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Shock absorbers has light misting of oil (5.3.2 (b))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Service brake fluctuating, but not excessively all (1.2.1 (e))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Shock absorbers has light misting of oil (5.3.2 (b))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Brake pipe excessively corroded front to o/s/r flexi (1.1.11 (c))

Brake pipe excessively corroded to n/s/r flexi (1.1.11 (c))

Nearside Front Brake pipe excessively corroded to flexi (1.1.11 (c))

Nearside Front Macpherson strut pin or bush excessively worn top mount (5.3.4 (a) (i))

Nearside Brake pipe slightly corroded front to rear (3.6.B.2c)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Brake pipe slightly corroded front to rear (3.6.B.2c)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear coil spring broken (2.4.C.1a)

Nearside Brake pipe slightly corroded front to rear (3.6.B.2c)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Brake pipe slightly corroded front to rear (3.6.B.2c)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Anti-roll bar has excessive play in a ball joint droplink (2.4.G.2)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Nearside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Centre Exhaust has part of the system excessively deteriorated (7.1.1a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear coil spring incomplete (2.4.C.1a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake lever has no reserve travel (3.1.6b)

wiper blades rubber is deteriorated

Offside Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Centre Rear registration plate character(s) likely to be misread (6.3.4b)