2011 Volkswagen Polo

Nearside Front Lower outer sill corroded

Offside Front Lower outer sill corroded

rear exhaust box outer skin corroded

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Brake pad(s) wearing thin front inner pads wearing low (1.1.13 (a) (ii))

Nearside Front Lower outer sill corroded

Offside Front Lower outer sill corroded

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

rear exhaust box outer skin corroded

Nearside Front Inner Anti-roll bar linkage pin or bush worn but not resulting in excessive movement D (5.3.4 (a) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))

Offside Front Inner Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))

Rear exhaust corroded

Offside Headlamp light intensity severely reduced (4.1.4 (a))

Nearside Front Inner Anti-roll bar linkage pin or bush worn but not resulting in excessive movement D (5.3.4 (a) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))

Offside Front Inner Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))

Rear exhaust corroded

Nearside Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement D (5.3.4 (a) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))

Nearside Rear damper dust cover split

Offside Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement D (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear damper dust cover split

Rear exhaust corroded

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement D (5.3.4 (a) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))

Nearside Rear damper dust cover split

Offside Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement D (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear damper dust cover split

Rear exhaust corroded

Offside Front Lower Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Front Integral body structure inadequately repaired such that structural rigidity is significantly reduced inner sill not welded. (6.1.1 (d) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Front Integral body structure inadequately repaired such that structural rigidity is significantly reduced inner sill not welded (6.1.1 (d) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge 2.57mm (5.2.3 (e))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

back box outer skin corroded.

front pipe flexi outer skin worn.

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge 2.57mm (5.2.3 (e))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

back box outer skin corroded.

front pipe flexi outer skin worn.

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

back box outer skin corroded.

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Headlamps matched pair are not the same shape (4.1.4 (d))

Nearside Front Direction indicator obviously incorrectly positioned (4.4.3 (a))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Headlamp aim too low and too far to the left. (4.1.2 (a))

Nearside Front Position lamp obviously incorrectly positioned (4.2.3 (a) (i))

Nearside Front Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Headlamp aim too low and too far to the right. (4.1.2 (a))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Vehicles internal headlight adjuster altered to recheck lights

Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

rear brake application uneven (3.7.B.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp aim too low (1.8)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

nails in both rear tyres