MOT Status
ExpiredMileage
82,959 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Brake pipe corroded, covered in grease or other material front to center corroded (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Brake pipe corroded, covered in grease or other material front to center corroded (1.1.11 (c))
Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Outer Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Offside Front Outer Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner arch (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Wheel bearing has excessive play (5.1.3 (a) (i))
Offside Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Outer Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Offside Front Outer Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner arch (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Fuel Pipe/s corroded ()
Nearside Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (2.4.A.3)
Nearside Rear Trailing arm corroded but not seriously weakened (2.4.G.1)
Nearside Rear wheel bearing has slight play (2.6.2)
Offside Front Torque/reaction arm has a slightly deteriorated rubber bush (2.4.G.2)
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive inner arch (5.2.6)
Offside Rear wheel bearing has slight play (2.6.2)
Offside Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner arch (5.2.6)
Offside Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Parking brake lever has no reserve travel (3.1.6b)
Fuel Pipe/s corroded ()
Nearside Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (2.4.A.3)
Nearside Rear Trailing arm corroded but not seriously weakened (2.4.G.1)
Nearside Rear wheel bearing has slight play (2.6.2)
Offside Front Torque/reaction arm has a slightly deteriorated rubber bush (2.4.G.2)
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive inner arch (5.2.6)
Offside Rear wheel bearing has slight play (2.6.2)
Offside Suspension arm has slight play in a ball joint (2.4.G.2)
Fuel Pipe/s corroded ()
Nearside Front tyre side wall damage
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Fuel Pipe/s corroded ()
Nearside Front tyre side wall damage
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Brake pipe excessively corroded (3.6.B.2c)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Brake pipe slightly corroded (3.6.B.2c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear wheel bearing has slight play (2.6.2)
n/s/r hand & footbrake effort low
Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Tyre has ply or cords exposed (4.1.D.1b)
Nearside Brake pipe slightly corroded (3.6.B.2c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear wheel bearing has slight play (2.6.2)
n/s/r hand & footbrake effort low
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear wheel bearing has excessive play (2.6.2)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Brake pipe excessively corroded (3.6.B.2c)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
How Reliable is the Kia Rio?
Based on 1,637,344 MOT tests across 141,212 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
FV03 UCA is a 2003 Kia Rio in Silver with a 1,343cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 65.2%.
Across all 2003 Kia Rio models, the average MOT pass rate is 70.2% with a typical mileage of 50,191 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Kia Rio fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 34,517 recorded failures. If you're considering buying FV03 UCA, it's worth having these areas checked by a mechanic before committing.
The Kia Rio typically stays on UK roads for around 25 years. At 23 years old, this Kia Rio is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of FV03 UCA?
You can check the full history of FV03 UCA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was FV03 UCA registered?
FV03 UCA is a 2003 Kia Rio, first registered on 17 June 2003.
Is FV03 UCA safe to buy?
The MOT history for FV03 UCA shows 23 tests with a 65.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does FV03 UCA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on FV03 UCA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.