2004 Mercedes-benz Vito

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security rear arch and outer sill (6.2.2 (d) (i))

Offside Rear Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security arch and outer sill (6.2.2 (d) (i))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Shock absorbers has light misting of oil both front (5.3.2 (b))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill and rear arch (6.2.2 (d) (i))

Offside Rear Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill and arch (6.2.2 (d) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill and rear arch (6.2.2 (d) (i))

Offside Rear Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill and arch (6.2.2 (d) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Headlamp has a product on the lens but not seriously reducing light output both front (4.1.4 (b))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security both rear sills (6.2.2 (d) (i))

Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Door mirror cover missing but no sharp edges.

Offside Front Obligatory mirror slightly damaged (3.3 (b) (i))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced At front corner as marked. (6.1.1 (c) (i))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced At front as marked. (6.1.1 (c) (i))

Offside Rear Tyre has ply or cords exposed Dangerous.!!! (5.2.3 (d) (ii)) DANGEROUS

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Door mirror cover missing but no sharp edges.

Offside Front Obligatory mirror slightly damaged (3.3 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Direction indicator incorrect colour both (4.4.3 (a))

Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced welding unsatisfactory (6.1.1 (c) (i))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced unsatisfactory welding (6.1.1 (c) (i))

Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced central inner sill to floor as marked (6.1.1 (c) (i))

Offside Rear Service brake excessively fluctuating (1.2.1 (e))

Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced central floor to inner sill as marked (6.1.1 (c) (i))

Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both sides inner sills welding not satisfactory (6.1.1 (c) (i))

Offside Rear Tyre worn close to legal limit/worn on edge wearing on inner edge (5.2.3 (e))

Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (sharp edge) (6.2.2 (d) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced wheel arch (6.1.1 (c) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive suspension arm (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive sub frame (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive suspension arm (5.3.6 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Tyre worn close to legal limit/worn on edge both tires wearing bald on inner side (5.2.3 (e))

rear wheel arches and undersides slightly corroded

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Horn not working (7.7 (a) (ii))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Rear reflector missing (4.8.2 (a) (ii))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps both sides (4.7.1 (b) (ii))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Tyre worn close to legal limit/worn on edge both tires wearing bald on inner side (5.2.3 (e))

rear wheel arches and undersides slightly corroded

Central Rear Seat belt locking mechanism does not secure or release (5.2.5a)

Rear Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Electronic stability system warning lamp indicates a fault (3.4.1c)

Front passenger door cannot be opened from inside the vehicle (6.2.B.1b)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Oil leak

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Oil leak

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear Seat belt retracting mechanism defective (5.2.5b)

Nearside Rear coil spring broken (2.4.C.1a)

Nearside Front Headlamp aim too low (1.8)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front coil spring fractured (2.4.C.1a)

Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)