2005 Honda Xr 125 L-4

Front Brake disc(s) excessively worn (3.2.A1l)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Direction indicators not working (1.5.1c)

Drive chain excessively tight (6.2.1d)

Front Exhaust is leaking and excessively noisey (7.1.1b)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Horn not working (1.7.3a)

Offside Rear Direction indicator insecure (1.5.3b)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Tyre fouling another component (4.1.4)

Registration plate character(s) likely to be misread (6.3.4b)

Registration plate insecure (6.3.1b)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear wheel bearings have slight free play (2.4.A.2c)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Headlamp aim too high (1.6)

Headlamp insecure (1.2.3b)

Horn not working (1.7.3a)

Nearside Rear Footrest missing (6.2.1a)

Rear Rear wheel bearings have excessive free play (2.4.A.2c)

Rear Rear wheel spindle securing nut locking device insecure (2.4.A.2b)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Riders seat insecure (6.2.1a)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Front Wheel has a slightly eccentric bead rim. (4.2.2)

Rear Wheel has a slightly eccentric bead rim. (4.2.2)

Steering movement slightly 'notchy' (2.2.1b)

Wheel alignment slightly misaligned. (2.5.1)

Front Wheel alignment slightly misaligned. (2.5.1)

Inner Front Front shock absorber has light misting of stanchion (2.3.3)

Front Fairings insecure and likely to impede the steering (2.1.2e)

Nearside Rear Direction indicator insecure (1.5.3b)

Offside Front Footrest insecure (6.2.1a)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Drive chain worn to excess (6.2.1e)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))