2007 Mercedes-benz Cls

Offside Front Brake disc back plate insecure

Oil leak, but not excessive (8.4.1 (a) (i))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Inner Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Brake disc back plate insecure

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis leg corroded (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis leg corroded (5.3.6 (a) (i))

Offside Rear Tyre has a cut but not deep enough to reach the ply or cords outer wall damaged (5.2.3 (d) (i))

Rear Exhaust mounting defective brackets broke, exhaust corroded and repaired in places (6.1.2 (a))

Emissions not tested unable to test properly due to excessive black smoke and blowing exhaust (8.2.2.2 (e))

Exhaust fumes entering cabin (6.1.2 (b) (i))

Front Exhaust has a major leak of exhaust gases under bonnet by down pipe joints / egr pipes (6.1.2 (a))

Nearside Front Lower Suspension component ball joint excessively worn ball joint pressed in hub (5.3.4 (a) (i))

Offside Front Brake pipe excessively corroded by anti roll bar link (1.1.11 (c))

Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Road wheel fixing missing (5.2.1 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Front Track rod end ball joint worn to the extent there is a serious risk of detachment (2.1.3 (b) (ii)) DANGEROUS

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis leg corroded (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis leg corroded (5.3.6 (a) (i))

Offside Rear Tyre has a cut but not deep enough to reach the ply or cords outer wall damaged (5.2.3 (d) (i))

Rear Exhaust mounting defective brackets broke, exhaust corroded and repaired in places (6.1.2 (a))

((0.90)) 245/40/18 X 4,

ALL SA'S PLASTIC COVERS ETC

Front Suspension component mounting prescribed area is corroded but not considered excessive NSF & OSF INNER FLITCH/SHOCK MOUNT AREAS,,,,,,,,,,,VHSC,!!!! (5.3.6 (a) (i))

Offside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Tyre worn close to legal limit/worn on edge NSR & OSR IE'S-PODOT-MONITOR (5.2.3 (e))

SERV?..245/40/18 X 4,,PLASTICS X 3,,NSF & OSF INNER FLITCH AREAS BEHICND SHOCKS VHSC,,REAR SUS ARMS PLASTIC COVERS ETC,,

Nearside Front Outer Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt ***********,,FRONT D/COVER ..!!!!!!!!!!!!! (5.3.4 (b) (ii))

Rear Exhaust has a major leak of exhaust gases **********,,REAR EX BOX'S..!!!!!!!!!!!!!!!!1 (6.1.2 (a))

SERV?..245/40/18 X 4,,PLASTICS X 3,,NSF & OSF INNER FLITCH AREAS BEHICND SHOCKS VHSC,,REAR SUS ARMS PLASTIC COVERS ETC,,

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)

Undertrays obscuring some components from view

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Side repeater not working (1.4.A.2c)

Offside rear brake binding (3.7.B.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear coil spring incomplete (2.4.C.1a)

Windscreen washer provides insufficient washer liquid (8.2.3)

o/s/f tyre worn low on the inner edge

Offside Track rod end ball joint has excessive play (2.2.B.1f)