2008 Toyota Aygo

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Anti-roll bar linkage damaged but not seriously weakened (5.3.3 (b) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Coil spring corroded x2 (5.3.1 (b) (i))

Rear Shock absorbers has a reduced damping effect x2 (5.3.2 (d))

Rear left and right sill corroded

exhaust clamp corroded

rear brakes slightly binding

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Anti-roll bar linkage corroded and seriously weakened x2 (5.3.3 (b) (i))

Hazard warning switch inoperative (4.4.2 (a) (ii))

Headlamp aim too high (4.1.2 (a))

Rear Brake pipe excessively corroded x2 (1.1.11 (c))

Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Suspension arm pin or bush worn but not resulting in excessive movement offside front wishbone rear bush worn (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement both sides (2.4.G.2)

Front Brake pad(s) wearing thin both sides (3.5.1g)

Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement both sides (2.4.G.2)

Nearside Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement both sides (2.4.G.2)

Front Brake pad(s) wearing thin both sides (3.5.1g)

Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement both sides (2.4.G.2)

Nearside Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear registration plate dirty (6.3.1d)

Nearside front Shock Absorber weak

Nearside rear outer tyre wall damaged/cut

Offside outer sill damaged

Front suspension has a suspension lower ball joint securing nut not locked Locking device missing (2.5.B.1a)

Nearside front Shock Absorber weak

Nearside rear outer tyre wall damaged/cut

Offside outer sill damaged

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp insecure (1.7.3)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Front Front drive shaft coupling flexible rubber or fabric coupling unit slightly cracked (2.5.C.1d)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Parking brake lever has little reserve travel (3.1.6b)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)