2007 Audi A4

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Front Bumper mountings corroded but not likely to become detached come away from mounting (6.1.4 (a) (i))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Suspension arm pin or bush excessively worn front most arm where shock bolts to (5.3.4 (a) (i))

Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Rear Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Front Bumper mountings corroded but not likely to become detached come away from mounting (6.1.4 (a) (i))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Tyre obviously under inflated (5.2.3 (h) (i))

Offside Rear Tyre slightly damaged/cracking or perishing 235/40 R18 (5.2.3 (d) (ii))

Windscreen damaged but not adversely affecting driver's view chips on glass (3.2 (a) (i))

Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Headlamp aim too low (4.1.2 (a))

Nearside Front Bumper insecure (6.1.4 (a) (i))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Seat belt not functioning as intended centre (7.1.2 (c))

Nearside Rear Outer Tyre has ply or cords exposed sidewall 2354018 (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm centre tread blocks (5.2.3 (e)) DANGEROUS

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Rear Outer Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Rear Outer Brake pad(s) wearing thin (1.1.13 (a) (ii))

air intake hose insecure

Nearside Rear Brake hose excessively deteriorated (3.6.B.4d)

Offside Rear Brake hose slightly deteriorated (3.6.B.4d)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Front registration plate missing (6.3.1a)

Offside Headlamp aim too low (1.8)

Nail in nearside rear tyre

Nearside Headlamp aim too low (1.8)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nail in nearside rear tyre

Front Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)