2009 Honda Cr-v

Front Suspension arm ball joint dust cover severely deteriorated Both side front (5.3.4 (b) (i))

Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Suspension arm ball joint dust cover severely deteriorated Both side front (5.3.4 (b) (i))

Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Fog Lamp Not Working

Offside Obligatory mirror slightly damaged (3.3 (b) (i))

Offside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Fog Lamp Not Working

Offside Obligatory mirror slightly damaged (3.3 (b) (i))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Offside Obligatory mirror slightly damaged (3.3 (b) (i))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

exhaust system has slight corrosion various

Integral body structure is corroded but structural rigidity is not significantly reduced underside various (6.1.1 (c) (i))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Integral body structure is corroded but structural rigidity is not significantly reduced underside various (6.1.1 (c) (i))

Offside Rear Position lamp not working (4.2.1 (a))

exhaust system has slight corrosion various

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Vehicles internal headlight adjuster altered to recheck lights ()

Nearside Front Lower Body has a sharp edge caused by damage wheelarch (6.1.C.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Lower Body has a sharp edge caused by damage rear door lower edge trim (6.1.C.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Vehicles internal headlight adjuster altered to recheck lights ()

Rear Tyre worn close to the legal limit both sides (4.1.E.1)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Rear Tyre worn close to the legal limit both sides (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Anti-roll bar linkage worn but not seriously weakened (2.4.G.1)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pad(s) wearing thin (3.5.1g)