2009 Ford Ka

Front Anti-roll bar linkage ball joint has slight play Both sides (5.3.4 (a) (i))

Front Macpherson strut pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))

Front Shock absorbers has light misting of oil Both sides (5.3.2 (b))

Inner Both sides Sills covered in underseal

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Area marked (6.2.2 (d) (i))

Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Underbody Area marked (6.1.1 (c) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))

Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Area marked (6.2.2 (d) (i))

Offside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))

Nearside Front Suspension arm pin or bush likely to become detached Rear bush (5.3.4 (a) (ii)) DANGEROUS

Offside Front Suspension arm pin or bush likely to become detached Rear bush (5.3.4 (a) (ii)) DANGEROUS

Front Anti-roll bar linkage ball joint has slight play Both sides (5.3.4 (a) (i))

Front Macpherson strut pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))

Front Shock absorbers has light misting of oil Both sides (5.3.2 (b))

Rear Exhaust mounting defective (6.1.2 (a))

Front Exhaust mounting defective (6.1.2 (a))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Underbody surface rust

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill (6.1.1 (c) (i))

Front Exhaust mounting defective (6.1.2 (a))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Underbody surface rust

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Headlamp aim too high (4.1.2 (a))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Macpherson strut mounting damaged but not seriously weakened o/s n/s (5.3.3 (b) (i))

underbody corrosion

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security front to rear surface corrosion (6.2.2 (d) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Inner Suspension spring mounting prescribed area is corroded but not considered excessive sill and floor (5.3.6 (a) (i))

Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Inner Suspension spring mounting prescribed area is corroded but not considered excessive sill and floor (5.3.6 (a) (i))

Offside Front Suspension arm pin or bush likely to become detached (5.3.4 (a) (ii)) DANGEROUS

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Inner Suspension spring mounting prescribed area is corroded but not considered excessive sill and floor (5.3.6 (a) (i))

Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Inner Suspension spring mounting prescribed area is corroded but not considered excessive sill and floor (5.3.6 (a) (i))

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

Offside Front Floor to sill slight corrosion noted

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement Rear bush (2.4.G.2)

Offside Rear Rear fog lamp not working (1.3.2b)

Rear fog lamp tell tale not working (1.3.1b)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

Offside Front Floor to sill slight corrosion noted

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement Rear bush (2.4.G.2)

Nearside Front Tyre reads 2.5 mm

Offside Front Tyre reads 3 mm

Nearside Front Valve stem seriously damaged (4.1.D.1e)

Offside Front Valve stem seriously damaged (4.1.D.1e)

Nearside Front Tyre reads 2.5 mm

Offside Front Tyre reads 3 mm

Windscreen washer provides insufficient washer liquid Water topped up in test (8.2.3)

Offside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Windscreen wiper blade insecure (8.2.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside front lower wishbone rear most bush slightly delaminated

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside front lower wishbone rear most bush slightly delaminated

Offside Headlamp aim not tested (1.8.A.1c)

Offside Headlamp not working on dipped beam (1.7.5a)

Nearside Front Headlamp aim too low (1.8)

Windscreen washer provides insufficient washer liquid (8.2.3)