2002 Suzuki Jimny

Brake load sensing valve stiff (1.1.17 (c) (ii))

Integral body structure is corroded but structural rigidity is not significantly reduced rear floor to body mounts (6.1.1 (c) (i))

Offside Front Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))

Brake load sensing valve stiff (1.1.17 (c) (ii))

Integral body structure is corroded but structural rigidity is not significantly reduced rear floor to body mounts (6.1.1 (c) (i))

Offside Front Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced both rear body mounts (6.1.1 (c) (i))

Offside Front Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Integral body structure is corroded but structural rigidity is not significantly reduced both rear body mounts (6.1.1 (c) (i))

Offside Front Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced By body mounting (6.1.1 (c) (i))

Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Floor (6.1.1 (c) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Headlamp aim too low (4.1.2 (a))

Offside Rear Exhaust system insecure Banging / catching body (6.1.2 (a))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced By body mounting (6.1.1 (c) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Rear Other passenger door cannot be opened from outside the vehicle Back door (6.2.3 (a))

Trailer electrical socket wiring insulation damaged or deteriorated and likely to cause a short-circuit (4.10 (b) (ii))

Fuel lines very rusty /corroded

N/s o/s rear chassis by spring mounts weak corroding splitting

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

No rear seats or seat belts fitted

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Very heavy under seal to underbody. Cannot see corrosion or weak areas to underside.

Offside Front Upper Arch corroded double

Offside Fuel Pipe/s corroded

Front Service brake excessively fluctuating (1.2.1 (e))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Upper Arch corroded double

Offside Fuel Pipe/s corroded

Fuel tank corroded and starting to split front section, no sign of leaks.

Offside Rear Fuel pipes corroded os chassis

Front Registration plate does not conform to the specified requirements Plate not reflective and not fully facing front, stick on plate on bumper. (0.1 (d))

Fuel tank corroded and starting to split front section, no sign of leaks.

Offside Rear Fuel pipes corroded os chassis

Passenger seat(s) missing at time of test rear seats

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust has a major leak of exhaust gases rear pipe (6.1.2 (a))

Nearside Front Anti-roll bar linkage ball joint excessively worn nut lose (5.3.4 (a) (i))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced rear inner arch and floor (7.1.1 (a) (i))

Nearside Side repeater not working (4.4.1 (a) (ii))

Passenger seat(s) missing at time of test rear seats

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

front fog lights inoperative

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

front svears have greese on