2004 Kawasaki ZZ-R1200

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement slight play in rear linkage bearings/bushes/sleeves (5.3.4 (a) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Drive chain excessively loose (6.1.7 (c) (i))

Front Stop lamp not working (4.3.1 (a) (ii))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Shock absorber has negligible damping effect (5.3.2 (b))

Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Suspension component pin or bush excessively worn Rear linkage bearings/sleeves have excessive play. (5.3.4 (a) (i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Rear shock absorber has a slightly reduced damping effect reduced damping. (2.4.A.3b)

Rear Rear wheel bearings have slight free play (2.4.A.2c)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear suspension bearing has slight free play Play in suspension linkages. (2.4.A2a(i))

Drive chain worn but not considered excessive (6.2.1e)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear suspension bearing has slight free play Linkage (2.4.A2a(i))

no number plate light

Drive chain excessively tight (6.2.1d) DANGEROUS

Rear Wheel alignment slightly misaligned. (2.5.1)

no number plate light

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Drive chain slightly loose (6.2.1d)

Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars (2.1.2b) DANGEROUS

Drive chain slightly loose (6.2.1d)

Drive chain slightly tight (6.2.1d)

Wheel alignment slightly misaligned. (2.5.1)