2005 Aprilia Mx 125

Front Wheel bearing has slight play (5.1.3 (a) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))

Suspension arm pin, bush or joint worn but not resulting in excessive movement swingarm (5.3.4 (a) (i))

Horn not working (1.7.3a)

Nearside Rear Direction indicators not working (1.5.1c)

Front suspension assembly component loose (2.3.1)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Drive chain sprocket worn to excess (6.2.1e)

Front Exhaust is leaking and excessively noisey (7.1.1b)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front wheel bearings have excessive free play (2.3.5b)

Nearside Front Direction indicators not working (1.5.1c)

Nearside Front Exhaust mounting missing (7.1.1c)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Steering headbearing has excessive free play (2.2.2)

Drive chain fouling another component (6.2.1d) DANGEROUS

Drive chain worn to excess (6.2.1e) DANGEROUS

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Brake disc(s) has slight run out (3.2.A1m)

Front wheel bearings are slightly rough (2.3.5b)

Front wheel bearings have slight free play (2.3.5b)

Rear suspension bearing has slight free play (2.4.A2a(i))

Steering headbearing has slight free play (2.2.2)

Rear reflector on motorcycle missing (1.4.1)

Front Brake disc(s) has slight run out (3.2.A1m)

Front wheel bearings are slightly rough (2.3.5b)

Front wheel bearings have slight free play (2.3.5b)

Rear suspension bearing has slight free play (2.4.A2a(i))

Steering headbearing has slight free play (2.2.2)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Front Exhaust mounting deteriorated. (7.1.1.c)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Front Exhaust mounting deteriorated. (7.1.1.c)

Rear Wheel alignment incorrect which adversely affects the handling (2.5.1)

Front Brake lever is damaged but the brake can still be readily applied (3.1.3c)

Front Tyre worn close to the legal limit (4.1.3(ii))

Headlamp main beam warning lamp not working.

Rear wheel bearings have slight free play (2.4.A.2c)

Drive chain excessively loose (6.2.1d)

Drive chain worn to excess (6.2.1e)

Front position lamp incorrect colour (1.1.2a)

Front wheel bearings have excessive free play (2.3.5b)

Steering headbearing has excessive free play (2.2.2)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Brake lever is damaged but the brake can still be readily applied (3.1.3c)

Front Tyre worn close to the legal limit (4.1.3(ii))

Headlamp main beam warning lamp not working

Rear wheel bearings have slight free play (2.4.A.2c)

Clutch lever bent (6.2.1g)

Drive chain worn but not considered excessive (6.2.1e)

Front wheel bearings have slight free play (2.3.5b)

Rear wheel bearings have slight free play (2.4.A.2c)

Steering headbearing has slight free play (2.2.2)

Front Wheel has an excessively distorted bead rim. (4.2.2)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear reflector on motorcycle missing (1.4.1)

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Front Wheel fractured but not significantly reducing the original strength (4.2.1a)

Front wheel bearings have slight free play (2.3.5b)

Steering headbearing has slight free play (2.2.2)

Front wheel bearings have slight free play (2.3.5b)

Rear mono-shock pivot worn but not excessive (2.4.B.4)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake cylinder leaking hydraulic fluid (3.2.B1e)

Rear position lamp incorrect colour (1.1.2b)

Front wheel bearings have slight free play (2.3.5b)

Rear mono-shock pivot worn but not excessive (2.4.B.4)