MOT Status
ExpiredMileage
126,070 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Anti-roll bar pin or bush worn but not resulting in excessive movement both side front (5.3.4 (a) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Headlamp has a product on the lens but not seriously reducing light output both side (4.1.4 (b))
Suspension arm pin or bush worn but not resulting in excessive movement both side front & both side rear (5.3.4 (a) (i))
both side arch, front subframe, both side sills, both side brake pipe, some suspension components all corroded
parking brake weak
Position lamp not working (4.2.1 (a) (ii))
Anti-roll bar pin or bush worn but not resulting in excessive movement both side front (5.3.4 (a) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Headlamp has a product on the lens but not seriously reducing light output both side (4.1.4 (b))
Suspension arm pin or bush worn but not resulting in excessive movement both side front & both side rear (5.3.4 (a) (i))
both side arch, front subframe, both side sills, both side brake pipe, some suspension components all corroded
parking brake weak
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Anti-roll bar pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Rear Coil spring corroded Both sides (5.3.1 (b) (i))
Wheel Arches Slightly corroded rear both sides
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Anti-roll bar pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Rear Coil spring corroded Both sides (5.3.1 (b) (i))
Wheel Arches Slightly corroded rear both sides
Windscreen washer provides insufficient washer liquid (3.5 (a))
Front Anti-roll bar pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Suspension arm pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive Both sides (5.3.6 (a) (i))
Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Coil spring corroded Both sides (5.3.1 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive Both sides (5.3.6 (a) (i))
Sub-frame corroded but not seriously weakened Front and rear (5.3.3 (b) (i))
Central Front Exhaust mounting defective (6.1.2 (a))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
both rear coil springs corroded
Brake cable insecure corroded clamp at rear trailing arm (1.1.15 (c))
Driver's seat fore and aft adjustment mechanism not functioning as intended. (6.2.5 (b) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Central Front Exhaust mounting defective (6.1.2 (a))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
both rear coil springs corroded
Nearside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive inner body sill (5.3.6 (a) (i))
advise excessive corrosion nearside rear vehicle bumper area.
Brake lever has insufficient reserve travel (1.1.2 (a))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch next to fuel filler neck (5.3.6 (a) (i))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))
Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner body sill (5.3.6 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Brakes imbalanced across an axle (1.2.1 (b) (i))
Nearside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive inner body sill (5.3.6 (a) (i))
advise excessive corrosion nearside rear vehicle bumper area.
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Parking brake lever defective but can be satisfactorily operated Little reserve travel. (1.1.6 (d))
Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Nearside rear brake binding (3.7.B.1)
Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement both (2.4.G.2)
Exhaust has a minor leak of exhaust gases (7.1.2)
Rear Brake pipe slightly corroded (3.6.B.2c)
both rear tyres perished
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Registration plate lamp not working (1.1.C.1d)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
How Reliable is the Toyota Yaris?
Based on 9,038,234 MOT tests across 631,037 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
FX51 SCG is a 2001 Toyota Yaris in Silver with a 998cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 76%.
Across all 2001 Toyota Yaris models, the average MOT pass rate is 74.7% with a typical mileage of 69,035 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Toyota Yaris fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 149,812 recorded failures. If you're considering buying FX51 SCG, it's worth having these areas checked by a mechanic before committing.
The Toyota Yaris typically stays on UK roads for around 27 years. At 25 years old, this Toyota Yaris is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of FX51 SCG?
You can check the full history of FX51 SCG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was FX51 SCG registered?
FX51 SCG is a 2001 Toyota Yaris, first registered on 1 September 2001.
Is FX51 SCG safe to buy?
The MOT history for FX51 SCG shows 25 tests with a 76% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does FX51 SCG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on FX51 SCG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.