2003 Smart (mcc) City Coupe

Fuel cap seal deteriorated

Oil leak, but not excessive (8.4.1 (a) (i))

Under tray fitted

Emissions unable to be completed (8.2.1.2 (d))

Horn not working (7.7 (a))

Nearside Front Headlamp aim too low (4.1.2 (a))

Offside Front Headlamp aim too low (4.1.2 (a))

Fuel cap seal deteriorated

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Under tray fitted

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Track rod end ball joint has excessive play and dust cover ripped (2.1.3 (b) (i))

Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

under body covers fitted

Nearside Front Direction indicator incorrect colour (4.4.3 (a))

Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

under body covers fitted

Anti-lock braking system warning lamp does not illuminate (1.6 (a))

Fuel cap/sealing device ineffective o ring (6.1.3 (b) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Headlamp levelling device inoperative (4.1.5 (a))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp levelling device inoperative (4.1.5 (a))

Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front floor corroded and holed

Offside Front sill corroded and holed

Offside Front suspension leg corroded

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

hazard switch operation intermittent

rear axle heavily corroded

sills and floor corroded behined covers/trays heavilly corroded

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Upper Shock absorber has a slightly worn bush (2.7.4)

under tray loose, brake pedal spongy,beam image poor

under tray loose, brake pedal spongy,beam image poor

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Rear fog lamp not working (1.3.2b)

Offside Rear Rear wheel bearing has excessive play (2.6.2)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear rear brake recording little or no effort (3.7.B.5a)

Offside Rear Rear wheel bearing rough when rotated (2.6.1) DANGEROUS

Offside Front Upper Shock absorber has a slightly worn bush (2.7.4)

under tray loose, brake pedal spongy,beam image poor

under tray loose, brake pedal spongy,beam image poor

e.m.l on

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Rear Fuel system component leaking (7.2.3) DANGEROUS

e.m.l on

Engine covers fitted obscuring some components in the engine bay

Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Under-trays fitted obscuring some underside components

offside front headlight aim on low side

Nearside Front Suspension arm synthetic bush deteriorated resulting in excessive movement (2.4.G.2)

Engine covers fitted obscuring some components in the engine bay

Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Under-trays fitted obscuring some underside components

offside front headlight aim on low side

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Stop lamp not working (1.2.1b)

Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside rear tyre has a cut

Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Offside rear tyre has a cut

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Brake pad(s) wearing thin (3.5.1g)

Front Brake hose excessively deteriorated (3.6.B.4d)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Headlamp aim too low (1.8)

Offside Front Front wheel bearing rough when rotated (2.5.A.2)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Front Brake pad(s) wearing thin (3.5.1g)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Registration plate lamp not working (1.1.5c)