2004 Honda Jazz

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive o/s and n/s (5.3.6 (a) (i))

underbody covered with underseal

Nearside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Outer Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Rear Vehicle structure modified such that structural rigidity is significantly reduced axle previously welding (6.1.1 (d) (i))

Brake disc worn, pitted or scored, but not seriously weakened front and rear (1.1.14 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Suspension component mounting prescribed area is corroded but not considered excessive both inner and outer sills (5.3.6 (a) (i))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Brake disc worn, pitted or scored, but not seriously weakened front and rear (1.1.14 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Suspension component mounting prescribed area is corroded but not considered excessive both inner and outer sills (5.3.6 (a) (i))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Front Lower Suspension component mounting prescribed area is corroded but not considered excessive Sill rusty (5.3.6 (a) (i))

Offside Rear Outer Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Brake hose has slight corrosion to ferrule both (1.1.12 (f) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Service brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Suspension component mounting repair covered in underseal Various previous welding repairs covered in underseal (5.3.6 (a) (i))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Suspension arm pin or bush likely to become detached Bush is detached from track control arm (5.3.4 (a) (ii)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Lower Suspension component mounting prescribed area is corroded but not considered excessive Sill rusty (5.3.6 (a) (i))

Offside Rear Outer Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Brake hose has slight corrosion to ferrule both (1.1.12 (f) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Service brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Suspension component mounting repair covered in underseal Various previous welding repairs covered in underseal (5.3.6 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner sill (6.2.2 (d) (i))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner sill (6.2.2 (d) (i))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outer sill (6.2.2 (d) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Central inner sill (6.2.2 (d) (i))

Offside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Inner sill (6.2.2 (d) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Front Tyre worn close to legal limit/worn on edge off side front tyre outer wall wearing thing (5.2.3 (e))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Brake pipe slightly corroded front to rear pipe leading to offside rear flexible hose (3.6.B.2c)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Brake pipe slightly corroded pipe leading to offside rear flexible hose (3.6.B.2c)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside rear brake fluctuating, but not excessively (3.7.B.3)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

rear brake application uneven (3.7.B.2)

Brake pipe slightly corroded pipe leading to offside rear flexible hose (3.6.B.2c)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside rear brake fluctuating, but not excessively (3.7.B.3)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

nearside front tyre has cut in tread

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)