2002 Suzuki GZ125

Front Position lamp missing (4.2.1 (a))

Rear Rear reflector missing (4.8.2 (a) (ii))

high beam light not working

Chain guard missing ()

Drive chain slightly loose (6.2.1d)

Drive chain sprocket carrier worn but not considered excessive (6.2.1e)

Drive chain sprocket slightly worn (6.2.1e)

Front Brake lever is damaged but the brake can still be readily applied (3.1.3c)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front shock absorber has light misting of stanchion (2.3.3)

Mudguard Missing

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Rear reflector on motorcycle missing (1.4.1)

Chain guard missing ()

Drive chain slightly loose (6.2.1d)

Drive chain sprocket carrier worn but not considered excessive (6.2.1e)

Drive chain sprocket slightly worn (6.2.1e)

Front Brake lever is damaged but the brake can still be readily applied (3.1.3c)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front shock absorber has light misting of stanchion (2.3.3)

Mudguard Missing

Clutch lever shortened. (6.2.1g)

Rear Drive chain slightly tight (6.2.1d)

Brake lever pivots excessively worn (3.1.3a)

Drive chain excessively loose (6.2.1d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Rear Drive chain sprocket worn to excess (6.2.1e)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Clutch lever shortened. (6.2.1g)

Exhaust noisy (7.1.2)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear wheel bearings have slight free play (2.4.A.2c)

high beam warning light not working

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust noisy (7.1.2)

High beam warning light not working

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust noisy (7.1.2)

High beam warning light not working

Front Front position lamp does not illuminate immediately when switched on (1.1.3a)

Offside Rear Direction indicator not working (1.5.1c)

Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Rear Rear reflector on motorcycle missing (1.4.1)

Rear Roller brake test indicates a sticking brake (3.3.A1a)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b) DANGEROUS

Exhaust noisy (7.1.2)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Main beam warning light not working

Headlamp aim too high (1.6)

Offside Rear Wheel spoke cracked. (4.2.1b)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))