2002 Honda XL125V

Front Valve stem slightly damaged (5.2.3 (j))

1 of 2 headlights working

Front tyre valve cracked

Rear age related cracks in tyre

Rear tyre valve cracked

slight bind to front brake

Inner Rear suspension bearing has slight free play swing arm bearings have side to side movement (2.4.A2a(i))

Drive chain slightly loose (6.2.1d)

Front Steering movement slightly 'notchy' (2.2.1a)

Front wheel bearings have slight free play (2.3.5b)

Nearside Inner Rear suspension bearing has slight free play (2.4.A2a(i))

Offside Front shock absorber has light misting of stanchion (2.3.3)

Front Front mudguard insecure (2.3.7)

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Drive chain worn but not considered excessive (6.2.1e)

Rear Brake pedal pivots slightly worn (3.1.3a)

Brake lever is short but brake can still be readily applied (3.1.3c)

Centre Exhaust is leaking but is not excessively noisey (7.1.1b)

Drive chain excessively loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Front Drive chain sprocket slightly worn (6.2.1e)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Offside Handlebar handgrip not secure to handlebars. (2.1.1c)

Rear Drive chain sprocket slightly worn (6.2.1e)

Brake lever is short but brake can still be readily applied (3.1.3c)

Centre Exhaust is leaking but is not excessively noisey (7.1.1b)

Drive chain worn but not considered excessive (6.2.1e)

Front Drive chain sprocket slightly worn (6.2.1e)

Rear Drive chain sprocket slightly worn (6.2.1e)

rear lower engine mount corroded

Drive chain excessively loose (6.2.1d)

Headlamp aim too high (1.6)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Brake disc(s) cracked (3.2.A1g)

rear lower engine mount corroded

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Horn not working (1.7.3a)

Rear Floor brake test indicates a sticking brake (3.3.C2c)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp aim beam image kick up to the offside (1.6)

Steering control fouling between components which interferes with the free movement of the steering (2.1.2a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Roller brake test indicates a binding brake (3.3.A1a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))