2003 Citroen Relay

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Corrosion on chassis rails and nearside rear jacking point

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Corrosion on chassis rails and nearside rear jacking point

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front inner arch corroded

Nearside Rear Service brake grabbing slightly (1.2.1 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front inner arch corroded

Offside Rear Service brake grabbing slightly (1.2.1 (c))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

exhaust corroded

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg (6.1.1 (c) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front inner arch corroded

Nearside Rear Service brake grabbing slightly (1.2.1 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front inner arch corroded

Offside Rear Service brake grabbing slightly (1.2.1 (c))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

exhaust corroded

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill and doorstep (5.3.6 (a) (i))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill and rear wheel arch (5.3.6 (a) (i))

Offside Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Exhaust heavily corroded

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Suspension component mounting prescribed area is corroded but not considered excessive inner sills and front wheel arches (5.3.6 (a) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

general corrosion to vehicle underside/body

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Brake load sensing valve stiff (1.1.17 (c) (ii))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

general corrosion to vehicle underside/body

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Brake load sensing valve stiff (1.1.17 (c) (ii))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

corrosion to body/underside

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Headlamp aim too low and too far to the right. (4.1.2 (a))

Offside Headlamp aim too low (4.1.2 (a))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Brake load sensing valve linkage seized (3.6.E.3)

Centre Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front brake disc in such a condition that it is seriously weakened corrosion (3.5.1i)

Nearside Headlamp aim not tested (1.8.A.1c)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Front brake disc in such a condition that it is seriously weakened corrosion (3.5.1i)

Offside Front front brake binding (3.7.B.1)

Offside Headlamp aim too high (1.8)

Offside Registration plate lamp not working (1.1.C.1d)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Brake load sensing valve stiff (3.6.E.3)

Nearside Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Brake load sensing valve stiff (3.6.E.3)

offside rear tyre slightly misshaped

rear exhaust silencer corroded

Nearside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Brake load sensing valve stiff (3.6.E.3)

offside rear tyre slightly misshaped

rear exhaust silencer corroded

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Offside rear brake recording little or no effort (3.7.B.5a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Offside Front Front wheel bearing rough when rotated (2.5.A.2)