2006 Mazda MX-5

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Rear Inner Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected Repair not continuously welded (5.3.6 (a) (ii)) DANGEROUS

Nearside Rear Inner Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Inner Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected Repair not continuously welded (5.3.6 (a) (ii)) DANGEROUS

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Rear Exhaust noisy (8.1.1 (a))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

rear brake back plates rusty

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Nearside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Service brake binding but not excessively both sides (1.2.1 (f))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings bottom inner sill (6.1.B.2)

Offside Rear Vehicle structure has slight corrosion bottom inner sill (6.1.B.2)

Brake pad(s) wearing thin Rear (3.5.1g)

Suspension arm rubber bush deteriorated but not resulting in excessive movement Front suspension arm inner bushes (2.4.G.2)

rear suspension bushes and roll bar links worn

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc slightly scored (3.5.1h)