2006 Ford Ka

Brake hose has slight corrosion to ferrule both side front (1.1.12 (f) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive both inner and outer sills (7.1.1 (a) (i))

Sub-frame pin or bush worn but not resulting in excessive movement both side rear (5.3.4 (a) (i))

Subframe mounting prescribed area is corroded but not considered excessive front (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive both front inner wings (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive both inner and outer sills (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive both rear inner wings (5.3.6 (a) (i))

exhaust system corroded

Brake hose ferrule excessively corroded both side rear (1.1.12 (f) (i))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill/floor (7.1.1 (a) (i))

Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Outer Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Brake hose has slight corrosion to ferrule both side front (1.1.12 (f) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive both inner and outer sills (7.1.1 (a) (i))

Sub-frame pin or bush worn but not resulting in excessive movement both side rear (5.3.4 (a) (i))

Subframe mounting prescribed area is corroded but not considered excessive front (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive both front inner wings (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive both inner and outer sills (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive both rear inner wings (5.3.6 (a) (i))

exhaust system corroded

Shock absorber has slight corrosion to the casing both rear (2.7.2a)

Nearside Front Brake hose has slight corrosion to ferrules ferrule corroded recommend replacement (3.6.B.4e)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive front sub-frame prescribed aria corroded (2.4.A.3)

Offside Front Brake hose has slight corrosion to ferrules ferrule corroded recommend replacement (3.6.B.4e)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive front sub frame mounting prescribed aria corroded (2.4.A.3)

Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear bush (2.4.G.2)

Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear bush (2.4.G.2)

Nearside Front Brake hose has slight corrosion to ferrules ferrule corroded recommend replacement (3.6.B.4e)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive front sub-frame prescribed aria corroded (2.4.A.3)

Offside Front Brake hose has slight corrosion to ferrules ferrule corroded recommend replacement (3.6.B.4e)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive front sub frame mounting prescribed aria corroded (2.4.A.3)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Front coil spring broken (2.4.C.1a)

Offside Front coil spring broken (2.4.C.1a)

Offside Rear Rear position lamp(s) not working (1.1.A.3b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

un derside of car rusty

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Headlamp aim too low (1.8)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front coil spring incomplete (2.4.C.1a)

clutch resevoir to master cylinder leaking brake fluid

selector sheft seal leaking

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)