MOT Status
ValidMileage
131,966 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Rear Exhaust has a minor leak of exhaust gases clamp (6.1.2 (a))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced central inner sill (6.1.1 (c) (i))
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Rear Exhaust has a minor leak of exhaust gases clamp (6.1.2 (a))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Central Front Tyre worn close to legal limit/worn on edge Both (5.2.3 (e))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced whole rear chassis area corroded (6.1.1 (c) (i))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill separated and rusted through (6.1.1 (c) (i))
Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced whole rear chassis area corroded (6.1.1 (c) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive BY SUB FRAME MOUNT (5.3.6 (a) (i))
Nearside Service brake excessively binding (1.2.1 (f))
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Windscreen washer not working (3.5 (a))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive BY SUB FRAME MOUNT (5.3.6 (a) (i))
Brake pipe corroded, covered in grease or other material both front to rear at rear (1.1.11 (c))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Lower suspension arm split pin missing
Nearside Front Road wheel slightly distorted inner rim (5.2.2 (c) (i))
Offside Front Road wheel slightly distorted inner and outer rims (5.2.2 (c) (i))
both inner and outer sills corroded
rear axle corroded
rear chassis legs corroded
Anti-lock braking system warning lamp does not illuminate (1.6 (a))
Brake lever has insufficient reserve travel (1.1.2 (a))
Nearside Front Steering locking device missing split pin (2.1.3 (d))
Nearside Rear Service brake excessively binding unable to check wheel bearing (1.2.1 (f))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Headlamp aim projected beam image is obviously incorrect bulb incorrectly fitted (4.1.2 (c))
Offside Rear Service brake excessively binding unable to check wheel bearing (1.2.1 (f))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Brake pipe corroded, covered in grease or other material both front to rear at rear (1.1.11 (c))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Lower suspension arm split pin missing
Nearside Front Road wheel slightly distorted inner rim (5.2.2 (c) (i))
Offside Front Road wheel slightly distorted inner and outer rims (5.2.2 (c) (i))
both inner and outer sills corroded
rear axle corroded
rear chassis legs corroded
Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))
Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement drop link (5.3.4 (a) (i))
Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement bonding (5.3.4 (a) (i))
Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement drop link (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Obligatory mirror slightly damaged (3.3 (b) (i))
Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement bonding (5.3.4 (a) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement drop link (5.3.4 (a) (i))
Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement bonding (5.3.4 (a) (i))
Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement drop link (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Obligatory mirror slightly damaged (3.3 (b) (i))
Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement bonding (5.3.4 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Road wheel slightly distorted (5.2.2 (c) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement both axle bushes (5.3.4 (a) (i))
boot pull lever broken
Bonnet primary retaining device ineffective don`t shut (3.1 (c))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Offside Front Position lamp not working (4.2.1 (a))
boot pull lever broken
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Road wheel slightly distorted (5.2.2 (c) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement both axle bushes (5.3.4 (a) (i))
Front Tyre worn close to the legal limit both...n/s & o/s (4.1.E.1)
Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement both...n/s & o/s (2.4.G.2)
Front Tyre worn close to the legal limit both...n/s & o/s (4.1.E.1)
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement arm...backbush (2.4.G.2)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Wheel rim damaged.
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Wheel rim damaged.
Brake pipe slightly corroded (3.6.B.2c)
Offside Rear rear brake binding (3.7.B.1)
Brake pipe slightly corroded (3.6.B.2c)
Parking brake lever has little reserve travel (3.1.6b)
Brake pipe slightly corroded (3.6.B.2c)
Child seat fitted not allowing full inspection of adult belt
FRONT WIPER S/DET/SPLIT
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
FY06 VSN is a 2006 Toyota Aygo in Red with a 998cc petrol engine. This vehicle has been through 30 MOT tests with a personal pass rate of 60%.
Across all 2006 Toyota Aygo models, the average MOT pass rate is 73.6% with a typical mileage of 60,291 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying FY06 VSN, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 20 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of FY06 VSN?
You can check the full history of FY06 VSN by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was FY06 VSN registered?
FY06 VSN is a 2006 Toyota Aygo, first registered on 31 March 2006.
Is FY06 VSN safe to buy?
The MOT history for FY06 VSN shows 30 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does FY06 VSN have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on FY06 VSN. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.