2008 Toyota Aygo

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Exhaust mounting defective (6.1.2 (a))

Rear Brake pipe corroded, covered in grease or other material both rear pipes greased. (1.1.11 (c))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills also axle mount (5.3.6 (a) (i))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills also axle mount (5.3.6 (a) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Exhaust mounting defective (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced Sills (6.1.1 (c) (i))

Front Exhaust mounting defective (6.1.2 (a))

all front and rear suspension components have corrosion including front and rear subframes and nearside and offside inner sills

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Vehicle structure is corroded but structural rigidity is not significantly reduced plus suspension (6.1.1 (c) (i))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Vehicle structure is corroded but structural rigidity is not significantly reduced plus suspension (6.1.1 (c) (i))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill center to rear (6.1.1 (c) (i))

Front Exhaust mounting defective and deteriorated (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material to whhel cylinder (1.1.11 (c))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer/under sill (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer/under sill (5.3.6 (a) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Front Exhaust mounting defective and deteriorated (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material to whhel cylinder (1.1.11 (c))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources 1 (4.7.1 (b) (i))

Front Exhaust mounting defective (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Rear Brake pipe corroded, covered in grease or other material to wheel cylinder (1.1.11 (c))

Nearside under sill corroded

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside under sills corroded

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Brake pipe excessively corroded front to rear to flexi (1.1.11 (c))

Offside Brake pipe excessively corroded front to rear to flexi (1.1.11 (c))

Offside Rear Brake pipe excessively corroded to wheel cylinder (1.1.11 (c))

Front Exhaust mounting defective (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Rear Brake pipe corroded, covered in grease or other material to wheel cylinder (1.1.11 (c))

Nearside under sill corroded

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside under sills corroded

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Brake pipe slightly corroded front to rear (3.6.B.2c)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Brake pipe slightly corroded front to rear (3.6.B.2c)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

both front to rear brakepipes slightly corroded

offside front wishbone rear bush splitting

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear wheel bearing has slight noise

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Oil leak

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)