MOT Status
ExpiredMileage
111,761 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both sill (6.2.2 (d) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Outer Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Stop lamp(s) not working both side (4.3.1 (a) (ii))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both side (5.3.4 (a) (i))
Front Coil spring corroded (5.3.1 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Headlamp has a product on the lens but not seriously reducing light output both side (4.1.4 (b))
Nearside Outer Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))
Rear Coil spring corroded (5.3.1 (b) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Brake pipe corroded, covered in grease or other material various pipes (1.1.11 (c))
Sub-frame corroded but not seriously weakened front and back (5.3.3 (b) (i))
Suspension component mounting prescribed area is corroded but not considered excessive front and back and inner and outer sills and floor area both sides (5.3.6 (a) (i))
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both side (5.3.4 (a) (i))
Front Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Tyre worn close to legal limit/worn on edge both side (5.2.3 (e))
Inner Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security both side sill (6.2.2 (d) (i))
Offside Outer Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Service brake excessively binding (1.2.1 (f))
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both side (5.3.4 (a) (i))
Front Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Tyre worn close to legal limit/worn on edge both side (5.2.3 (e))
Inner Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security both side sill (6.2.2 (d) (i))
Offside Outer Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both side (5.3.4 (a) (i))
Front Shock absorbers has slight external damage to the casing both side corroded (5.3.2 (b))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Rear Coil spring corroded (5.3.1 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both side (5.3.4 (a) (i))
Front Shock absorbers has slight external damage to the casing both side corroded (5.3.2 (b))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Rear Coil spring corroded (5.3.1 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced Vehicle Under Carriage Corroded. (6.1.1 (c) (i))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))
Nearside font tyre worn on both edges
offside front tyre worn on the outer edges
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside font tyre worn on both edges
Nearside Brake pipe slightly corroded Front to rear (3.6.B.2c)
Nearside Front Inner Brake pad(s) wearing thin (3.5.1g)
Nearside Front Inner brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Inner Brake pad(s) wearing thin (3.5.1g)
Offside Front Inner brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Lower Ball joint has slight play (2.2.B.1f)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Exhaust system not adequately supported clamp loose at rear front hanger corroded nearly through (7.1.1)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Rear Brake pipe excessively corroded front to rear at join to flex hose marked yellow (3.6.B.2c)
Nearside Front Brake pad(s) wearing thin inner difficult to see cannot see outer (3.5.1g)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Brake pipe slightly corroded front to rear at join to flex hose (3.6.B.2c)
Obligatory mirror deteriorated, but not seriously affecting the rear view central (8.1.2a)
Offside Front Brake pad(s) wearing thin inner difficult to see cannot see outer (3.5.1g)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Tyre worn close to the legal limit and perishing (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
offside front tyre perishing
Registration plate lamp not working (1.1.C.1d)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
How Reliable is the Peugeot 107?
Based on 2,229,410 MOT tests across 139,779 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
FY08 WNZ is a 2008 Peugeot 107 in Black with a 998cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 60.9%.
Across all 2008 Peugeot 107 models, the average MOT pass rate is 74.1% with a typical mileage of 54,654 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 107 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 42,280 recorded failures. If you're considering buying FY08 WNZ, it's worth having these areas checked by a mechanic before committing.
The Peugeot 107 typically stays on UK roads for around 21 years. At 18 years old, this Peugeot 107 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of FY08 WNZ?
You can check the full history of FY08 WNZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was FY08 WNZ registered?
FY08 WNZ is a 2008 Peugeot 107, first registered on 31 March 2008.
Is FY08 WNZ safe to buy?
The MOT history for FY08 WNZ shows 23 tests with a 60.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does FY08 WNZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on FY08 WNZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.