2009 Peugeot 107

Exhaust mounting defective (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear outer sill corroded

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))

Exhaust mounting defective (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear outer sill corroded

Position lamp not working (4.2.1 (a) (ii))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))

Front Brake pad(s) wearing thin Both sides (1.1.13 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced Sill both sides (6.1.1 (c) (i))

Nearside Rear Lower Suspension component mounting repair covered in underseal Both sides (5.3.6 (a) (i))

Offside Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Subframe mounting repair covered in underseal (5.3.6 (a) (i))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))

Front Brake pad(s) wearing thin Both sides (1.1.13 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced Sill both sides (6.1.1 (c) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Lower Suspension component mounting repair covered in underseal Both sides (5.3.6 (a) (i))

Offside Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Subframe mounting repair covered in underseal (5.3.6 (a) (i))

Front Sub-frame corroded but not seriously weakened heavily corroded (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting repair covered in underseal both sides (5.3.6 (a) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive both inner sills front to rear (7.1.1 (a) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive both outer sills (7.1.1 (a) (i))

Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Rear Service brake excessively fluctuating (1.2.1 (e))

Front Sub-frame corroded but not seriously weakened heavily corroded (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive both inner sills front to rear (7.1.1 (a) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive both outer sills (7.1.1 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Emissions not tested due to exhaust condition (8.2.1.2 (d))

Exhaust has a major leak of exhaust gases back box (6.1.2 (a))

Nearside Rear Brake pipe excessively corroded at wheel (1.1.11 (c))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust noisy (8.1.1 (a))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Exhaust noisy (8.1.1 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Front Brake pad(s) wearing thin (3.5.1g)

Offside front brake fluctuating, but not excessively (3.7.B.3)

Brake pipe excessively corroded both front to rears (3.6.B.2c)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside rear brake binding (3.7.B.1)

Front Brake pad(s) wearing thin (3.5.1g)

Offside front brake fluctuating, but not excessively (3.7.B.3)

Nearside Rear Brake pipe slightly corroded to flex (3.6.B.2c)

Offside Rear Brake pipe slightly corroded to flex (3.6.B.2c)

Nearside Rear Brake pipe slightly corroded to flex (3.6.B.2c)

Nearside Stop lamp not working (1.2.1b)

Offside Rear Brake pipe slightly corroded to flex (3.6.B.2c)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake lever has no reserve travel (3.1.6b)

Nail in nearside rear tyre

front drake discs corroded and worn