2011 Audi A4

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Inner Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Outer Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Front Upper Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Drive shaft joint constant velocity boot severely deteriorated & Offside Front (6.1.7 (g) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement & Offside Front front & Rear Arms (5.3.4 (a) (i))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front lower pinch bolt temporaray repair

Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Front Brake lining(s) less than 1.5 mm thick & Offside Front (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened & Offside Front (1.1.14 (a) (ii))

Nearside Front Drive shaft joint constant velocity boot severely deteriorated & Offside Front (6.1.7 (g) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement & Offside Front front & Rear Arms (5.3.4 (a) (i))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front lower pinch bolt temporaray repair

Front Brake disc significantly and obviously worn ON BOTH SIDES (1.1.14 (a) (i))

Offside Front Lower Suspension arm pin or bush excessively worn Rear (5.3.4 (a) (i))

Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Front Headlamp aim too high BOTH SIDES (4.1.2 (a))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Front (5.3.4 (a) (i))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Outer Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement X2 ARMS (5.3.4 (a) (i))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Front (5.3.4 (a) (i))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement arm (5.3.4 (a) (i))

Offside Rear Mudguard insecure

front brake pads low

knocking noise o/s/f suspension / steering

Nearside Front Lower Suspension arm pin or bush excessively worn track control arm rear bush (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Steering rack has excessive free play detected at the steering wheel (steering rack fitted) (2.3 (a) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement arm (5.3.4 (a) (i))

Offside Rear Mudguard insecure

front brake pads low

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Front Brake disc worn, but not excessively Both sides (1.1.14 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge 2mm on outer edge (5.2.3 (e))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt Rear arm (5.3.4 (b) (ii))

Nearside Rear Outer Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Lower Suspension arm attachment bracket/mounting insecure Front arm inner bolt loose? (5.3.3 (a) (i))

Offside Front Lower Suspension arm pin or bush excessively worn Front arm (5.3.4 (a) (i))

Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt Rear arm (5.3.4 (b) (ii))

Front Brake disc worn, but not excessively Both sides (1.1.14 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge 2mm on outer edge (5.2.3 (e))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Front Upper Suspension arm ball joint dust cover severely deteriorated o/s/n/s front arm (5.3.4 (b) (i))

Nearside Rear inner arch cover insecure.

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Headlamp aim too high (4.1.2 (a))

Front Upper Suspension arm ball joint dust cover severely deteriorated o/s/n/s front arm (5.3.4 (b) (i))

Nearside Rear inner arch cover insecure.

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Tyre worn close to the legal limit both (4.1.E.1)

Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components